User manual

Installation
33
EN
Door removal
It is not necessary to remove the door in
order to install the range, but is an added
convenience. Refer to the Use and Care
Guide for the oven door removal
instructions.
1.7 For the installer
• The plug must remain accessible after the
installation is complete. Do not kink or
trap the mains connection cable.
• The appliance must be fitted according
to the installation diagrams.
• When satisfied with the appliance,
please instruct the user on the correct
method of operation.
• Do not attempt to turn or stress the
threaded elbow on the manifold. You
risk damaging this part of the appliance,
which may void the manufacturer’s
warranty.
• Before leaving, check all connections for
gas leaks with soap and water. DO
NOT use a naked flame for detecting
leaks.
• Ignite all burners individually and
concurrently to ensure correct operation
of the gas valves, burner and ignition.
• Turn the gas knobs to the low position
and observe stability of the flame for
each burner individually and all
together.
• In case the appliance fails to operate
correctly after all checks have been
carried out, refer to the Authorized
Assistance Center in your area.
• When satisfied with the appliance,
please instruct the user on the correct
method of operation.
• LEAVE THESE INSTRUCTIONS WITH
APPLIANCE AFTER INSTALLATION IS
COMPLETE.