User manual

Use
23
EN
Heating accelerator function
This function allows you to bring the
cooking zone to the selected power level
more quickly than when selecting the power
level.
To activate the Heating accelerator
function:
1. Press and hold a cooking zone knob.
2. Keep the knob pressed and turn it
counterclockwise to position or
until the symbol appears on
the corresponding cooking zone display
(a beep will be emitted).
3. Keep the knob pressed and select the
required power level within 3 seconds.
The corresponding cooking zone
display will show and the selected
power level number alternating.
You can increase the power level at any
time. The “acceleration” time frame will be
modified automatically.
To deactivate the Heating acceleration
function, simply bring the knob to the OFF
position or select a lower power level.
Bridge function
The bridge function allows you to control
two cooking zones simultaneously. This
function is useful when cooking with oblong
cookware such as roasting pans or fish
kettles, or when cooking with two pans at
the same time.
To activate the Bridge function:
1. Press and hold turn the front / rear left or
right knobs counterclockwise to the
positions (a short beep will be
emitted):
NOTE: Once the selected power
level is reached, the Heating
accelerator function will be
deactivated (the symbol will
disappear) and the power level
will remain the selected one.
• This function is only available for
pairs of front and rear zones (1 -
2 and 4 - 5). All the other zone
combinations are not allowed.
• With the bridge function
activated, is it not possible to
activate Boost mode.