User Manual

Method 2

1. Use four ST4*8mm screws to fix the mounting bracket onto the hood. Then

put two ST4*30mm screws into the wall. Hang the hood onto the wall.

2. Use eight ST4*14mm screws to fix the hood onto the cabinet from the

sides.

Method 3

1. Use four ST4*8mm screws to fix the mounting bracket onto the hood. Then

put two ST4*30mm screws into the wall. Hang the hood onto the wall.

2. Use four M4*35mm screws, eight washers and four nuts to fix the hood

onto the cabinet from the top.

And then connect the ducting pipes to the outlet. Install the lamps and filter

back to the hood.