User manual

User instructions
7
ENERSAVE OPTION
This option further reduces energy consumption by opening the door at
the end of the cycle for more effective drying. At the end of the wash an
automatic device releases the door, which slowly opens by a few
centimetres. This allows optimal drying even with low rinsing
temperatures, for significant energy saving.
The dishwasher remains in an idle state between the rinse stage and the
end of the cycle to allow proper drying (the display shows the time left until
the end of the cycle). Opening the door at this stage causes the cycle to
stop and ends the program.
The program end is signalled by a short beep and the flashing of the
indicator lights for programs 4 and 5.
Enersave
is activated automatically if the selected program is
compatible with the option. It can be deactivated before the program is
started.
When the function is activated, opening of the door
must not be impeded
in any way; do not leave anything in the necessary space in front of the
door to allow it to open. Do not force the door lock before the end of the
cycle is signalled, as this would da
mage the mechanism.
PROGRAM DELAY
The start of the washing program can be delayed by from 3 to 9 hours to
program the dishwasher to operate at the preferred time of day (e.g.
overnight).
● It is not possible to select the option once the cycle has begun.
● When the door is closed, the appliance will prewash the dishes, after
which the count of the "program delay" set will begin.
The button can be pressed again to
select the
delay required (the relative light comes on) or
disable the option (lights off).