Specifications Sheet

EAN 9345025001405

Finish stainless steel fascia rail

Dimensions 175mmH x 598mmW x 280mmD closed

175mmH x 598mmW x 432mmD open

Installation undermount

Motor 140 watt

Air extraction • duct direct to atmosphere — 150mm

diameter ducting required

• recirculate to kitchen — 125mm ducting

required

Capacity 440m³/hr intensive (IEC 61591: p=0)

420m³/hr intensive (IEC 61591: p=1)

Noise rating 54–67 dBA (full)

Illumination 2 x 20 watt halogen globes

Speeds two + intensive*

Current 0.583 amp

Power supply 220–240 volt, 50Hz

connected 2.1m power cord with 3-pin 10

amp plug

Supplied one-piece ﬁlter, 3-ply aluminium —

removable, washable

Weight 8.33kg gross, 7.07kg net

STH600X

Smeg 60cm telescopic rangehood

ID290615

code STH600X

WARNING: technical specications and product sizes can be varied by the manufacturer

without notice. Cutouts for appliances should only be by physical product measurements.

The above information is indicative only.

*INTENSIVE: the Intensive Speed function

activates maximum air extraction for 10 minutes

to meet the needs heavy-duty cooking, such as

stir-fry.

p = 0 airﬂow direct out of motor housing

p = 1 airﬂow after 1m & 90° bend + 1m

PAGE 1
STH600X Smeg 60cm telescopic rangehood EAN 9345025001405 Finish stainless steel fascia rail Dimensions 175mmH x 598mmW x 280mmD closed 175mmH x 598mmW x 432mmD open Installation undermount Motor 140 watt Air extraction • • duct direct to atmosphere — 150mm diameter ducting required recirculate to kitchen — 125mm ducting required Capacity 440m³/hr intensive (IEC 61591: p=0) 420m³/hr intensive (IEC 61591: p=1) Noise rating 54–67 dBA (full) Illumination 2 x 20 watt halogen globes Speeds t
PAGE 2
STH600X Smeg 60cm telescopic rangehood 5 135 40 24 0-152 280 23 24 83.5 10-30 224 18 15 78.5 minimum 600mm minimum 650mm 150 18 20 260 15-30 21 151 50 50 598 NB: drawings are not to scale — they are to assist only WARNING: technical specifications and product sizes can be varied by the manufacturer without notice. Cutouts for appliances should only be by physical product measurements. The above information is indicative only.