Instruction manual

Installation
11
DRAIN CONNECTION
Insert the dishwasher’s drain hose into a drain pipe
having a diameter of at least 4 cm, or alternatively, place
it inside the kitchen sink using the plastic support
provided, taking care not to crush or excessively bend
the hose. It is important to prevent the hose from coming
loose and falling. For this purpose, the plastic support is
equipped with a hole for tying it to the wall or water tap.
The free end should be positioned at a height of between
30 and 100 cm, and should never be submerged in
water.
If a horizontal drain extension hose is used (for a maximum 3 m), the drain hose can
be placed at a maximum height of.
85 cm
from the ground.
2.4 Electrical connection
Check that the voltage and the frequency of the mains match the ratings
on the name plate of the appliance positioned on the inner edge of the
door.
 The plug on the supply cord and the corresponding socket outlet must be of the
same type and meet the regulations in force.
 The plug must be accessible after installation.

Never disconnect the plug by pulling on the power supply lead.
 After changing the supply cord, make sure that the bracket which secures the
cord is fixed securely in place.
 Do not use adaptors or shunt connections in order to avoid the possibility of
overheating or burning.
The power cable must be replaced by the manufacturer or by an
Authorized Service Centre.