Instruction manual

User instructions
17
6. Troubleshooting
The dishwasher is capable of signalling a number of faults through the
simultaneous illumination of several indicator lights, with the following
meanings:
FAULT
DESCRIPTION
E1
Acquastop failure (some models only)
E2
Safety level
E3
Water heating fault
E4
Water temperature detection fault
E5
Water intake fault
E6
Water drainage fault
E7
Turbine flow-meter fault (some models only)
E8
Alternate washing system fault
E9
Water intake system fault
E11
Wash pump fault.
Light off
Light on
Light flashing
If an alarm occurs, the machine stops the current program and indicates the fault.
Alarms E1 and E11 require you to contact the technical assistance service.
Alarm E7 is displayed at the end of the cycle, which is anyway completed, as it
does not affect the operation of the dishwasher.
For all other alarms, proceed as follows: stop the current program, switch off the
dishwasher. Switch on and program the dishwasher again to start the new wash cycle.
If the malfunction persists, contact your authorised Service Centre and
provide it with the fault code.
The contact details of the Technical Assistance Department can be
found on the warranty certificate and the website