User manual

Use
22
2. Turn the front left cooking zone knob
back to the 0 position and turn the rear
left cooking zone knob until it reaches
position 9. A prolonged beep will be
emitted.
3. Use the front left cooking zone knob to
set the required power: this knob now
controls both the cooking zones that are
in use.
To deactivate the Multizone function:
• Put both knobs back to the 0 position (off).
Keep warm
To activate the Keep Warm function:
• Turn the knob for the required cooking
zone until the symbol appears on
the corresponding display.
Booster function
• Turn the knob clockwise to the P position
for two seconds and then release.
The display shows the symbol. After 5
minutes, the Booster function will be
disabled automatically and cooking will
continue at power level 9.
Only for some zones: the Booster function
is always enabled and has to be disabled
manually using the corresponding knob.
Power control
The hob is fitted with a power control
module that optimises/limits consumption. If
the overall set power level exceeds the
maximum limit permitted, the electronic
circuit board will automatically manage the
power supplied by the hot plates.
The module tries to maintain the maximum
deliverable power levels. Levels set by the
automatic control will appear on the
display.
This function automatically divides
the power equally between both
zones that are in use.
The Keep warm function allows
you to keep cooked food warm.
The booster function allows the
cooking zone to be activated at
maximum power for as long as 5
minutes. It can be used to bring a
large quantity of water to a boil
rapidly or to broil meat.
The Booster function has priority
over the heating accelerator
function.