User manual
PRECAUTIONS - 3591477A166/A
e
mixtures on the hob during 
cooking.
• Do not place materials or 
substances that could melt or 
catch fire (paper, plastic or 
aluminium foil) on the 
appliance while it is in use.
• Do not use steam jets to clean 
the appliance.
• Place the cookware directly on 
the glass ceramic surface.
• Do not put empty pans or frying 
pans on switched on cooking 
zones.
• Do not use rough or abrasive 
materials or sharp metal 
scrapers.
• Do not use cleaning products 
containing chlorine, ammonia 
or bleach on parts made of 
steel or that have metallic 
surface finishes (e.g. anodizing, 
nickel- or chromium-plating).
• Do not use abrasive or 
corrosive detergents (e.g. 
scouring powders, stain 
removers and metallic 
sponges) on glass parts.
• The glass ceramic surface is 
highly resistant to impacts. 
However, avoid hard, solid 
objects falling on the cooking 
surface as they may cause it to 
break.
• Never use the oven door to 
lever the appliance into place 
when fitting.
• Avoid exerting too much 
pressure on the door when 
open.
• Take care that no objects are 
stuck in the doors.
• Do not use the handle to lift or 
move this appliance.
Installation
• THIS APPLIANCE MUST NOT 
BE INSTALLED IN BOATS OR 
CARAVANS.
• This appliance must not be 
installed on a pedestal.
• Always use any necessary/
required personal protective 
equipment (PPE) before 
performing any work on the 
appliance (installation, 
maintenance, positioning or 
movement).
• Position the appliance into the 
cabinet cut-out with the help of 
a second person.
• Check that the carcase has the 
required openings.
• Check that the carcase material 
is heat resistant.
• To avoid potential overheating, 
the appliance must not be 
installed behind a decorative 
door or a panel.
• Installation and servicing should 
be carried out by qualified 
personnel in accordance with 
current standards.
• Have the electrical connection 
performed by authorised 
technical personnel.
• The appliance must be 
connected to earth in 
compliance with electrical 










