Instruction manual

Cleaning and maintenance
28
Igniters and thermocouples
For correct operation the igniters and
thermocouples must always be perfectly
clean. Check them frequently and clean
them with a damp cloth if necessary.
Remove any dry residues with a wooden
toothpick or a needle.
Teppanyaki plate
The Teppanyaki plate is easier to clean
when it is still lukewarm.
Use conventional specific detergents for
stainless steel and non-abrasive sponges.
Any remaining encrustations or food
residues can be easily. Dry it carefully.
4.3 Removing the door of the
auxiliary oven
For easier cleaning, the door can be
removed and placed on a canvas.
To remove the door proceed as follows:
1. Open the door completely and insert two
pins into the holes on the hinges
indicated in the figure.
2. Grasp the door on both sides with both
hands, lift it forming an angle of around
30° and remove it.
Do not soak the plate in water
immediately after use. Wait for it to
cool down.