User manual

Installation
18
Assembling the backguard
The backguard must always be positioned
and secured correctly on the appliance.
1. Loosen the 6 screws on the back of the
top (A) and unscrew the 2 screws (B) on
the side part of the backguard.
2. Place the backguard on the top. Align
the 6 bottom slots of the backguard with
the 6 screws on the back of the top that
were previously loosened.
3. Tighten the 6 screws on the back of the
hob (A) and tighten the 2 screws under
the top (B) to secure the backguard.
Mounting the kick plate
The kick plate must always be positioned
and secured correctly on the appliance.
1. Place the kick plate in the front bottom
part of the appliance.
2. Place the kick plate in the front bottom
part of the appliance.
3. Screw the four side screws to fasten the
kick plate to the appliance.
4. Cover the holes of the kick plate with the
plugs provided.
The backguard provided is an
integral part of the product; it must
be fastened to the appliance prior
to installation.
The kick plate provided is an
integral part of the product; it must
be fastened to the appliance prior
to installation.