User manual

13
EN
Use / Cleaning and maintenance
Bun Warmer (2 - Fig. D)
The bun warmer is used to warm small bread
rolls, flat bread or pastries.
• TSBW01 model suitable for TSF01 Toaster
(8 - Fig. A)
• TSBW02 model suitable for TSF02 Toaster
(9 - Fig. A).
How to use (2 - Fig. D) :
1) Place the bun warmer on top of the
toaster, making sure the wire feet on the
bottom of the warmer fit into the toaster
slots.
2) Place small bread rolls, flat bread or
pastries on top of the warmer and set the
browning level to ‘1’ (no higher).
3) Lower the breadlift until it clicks to
activate the toasting cycle.
4 Cleaning and
maintenance
4.1 Cleaning the surfaces
To keep the surfaces in good condition, clean
regularly after use. Let them cool first.
Never use products that contain abrasives or
chlorine-based acids.
Pour the product onto a damp cloth and
wipe the surface, then wipe over thoroughly
and dry with a soft cloth or a microfiber cloth
Tips and suggestions
If grease or oil splatters on the
toaster, wipe it off immediately
using a clean, damp cotton cloth.
Any other servicing should be performed by
an authorized service representative.
4.2 Food stains or residues
Do not use metallic sponges or sharp
scrapers as they will damage the surfaces.
Use ordinary non-abrasive products with the
aid of wooden or plastic utensils if necessary.
Wipe over thoroughly and dry with a soft
cloth or a microfiber cloth.