User manual

Cleaning and care
17
EN
4 Cleaning and care
4.1 Instructions
4.2 Maintenance
Any other servicing should be performed by
an authorized service representative.
4.3 Cleaning the surfaces
To keep the surfaces in good condition,
clean regularly after use. Let them cool first.
4.4 Ordinary daily cleaning
Never use products that contain abrasives
or chlorine-based acids.
Pour the product onto a damp cloth and
wipe the surface, then wipe over thoroughly
and dry with a soft cloth or a microfiber
cloth.
4.5 Food stains or residues
Do not use metallic sponges or sharp
scrapers as they will damage the surfaces.
Use ordinary non-abrasive products with
the aid of wooden or plastic utensils if
necessary. Wipe over thoroughly and dry
with a soft cloth or a microfiber cloth.
Improper use
Electrical shock hazard
• Always unplug the cord before cleaning
the toaster, crumb tray and optional
accessories.
Hot appliance
Burns Hazard
• Always let the appliance and optional
accessories cool down before cleaning.
Improper use
Risk of damage to surfaces
• Do not use steam jets for cleaning the
appliance.
• Do not use cleaning products containing
chlorine, ammonia or bleach on steel
parts or parts with metallic finishes (e.g.
anodizing, nickel- or chromium-plating).
• Do not use abrasive or corrosive
detergents (e.g. powder products, stain
removers or metallic sponges).
• Do not use rough or abrasive materials
or sharp metal scrapers.
If grease or oil splatters on the
toaster, wipe it off immediately
using a clean, damp cotton cloth.