AS 61 E Dryer Asciugatrice
1 Warnings Please read the following information. Otherwise, there may be the risk of personal injury or material damage. Moreover, any warranty and reliability commitment will become void. General Safety • Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below of your machine may cause electrical parts to overheat. This may cause problems with your machine. • Your machine is designed to stop operating in the event of power resuming after a power failure.
When available a drying rack could be used for such items. • Plastic articles such as shower caps or babies’ waterproof napkin covers should not be placed in a tumble dryer. • Rubber-backed articles, clothes fitted with foam rubber pads, pillows, galoshes and rubber-coated tennis shoes should not be placed in a tumble dryer. young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely.
extended directly to the outdoors. There must be a small number of elbows as not to hinder air ventilation. C When you direct the water drain out, “Water Tank” warning LED will light up at the end of each program. • The hose should be attached to a height of maximum 80 cm. • You must be careful not the pinch or bend the hose. Electrical connection C The ventilation hose can be routed outdoors via a window or it can be connected to the air outlet in the bathroom.
3 Before drying Always follow the advice on the garment labels. With this dryer, dry only the laundry having a label stating that they are suitable for drying in a dryer by selecting the appropriate program. Following weights are given as examples.
4 Selecting a Program and Operating Your Machine Control panel 6 5 4 40 20 Pulire Filtri 1 2 60 80 130 On/Off 10 Bassa Temperatura Avvio Pausa 110 Refresh 130 3 1. On/Off button 2. Program selection knob 3. Start/Pause/Cancel button 4. Low temperature 5. Program follow-up indicator 6. Filter cleaning warning LED 7. Water tank full warning LED* 8.
Turning the machine on Prepare machine for program selection by pressing the “On/Off” button. C Pressing the “On/Off” button does not necessarily mean that the program has started. Press "Start/Pause/Cancel" button of the machine to start the program. temperatures and synthetic and easy-care laundry at low temperatures depending on the type of the laundry. C You must press the “Low temperature” button for synthetics.
Program selection and consumption table Program table Programs Capacity (kg) Spin speed in washing machine (rpm) Approximate amount of remaining humidity Drying time (minutes) 1200-1000 % 60 110 900-800 % 60 130 1200-1000 % 60 80-60 900-800 % 60 110-80 1200-1000 % 60 110-80 Cottons / Coloreds 6 A Ready to Wear 3 6 900-800 % 60 110 1200-1000 % 60 60-40 900-800 % 60 80-60 800 % 50 60-40 600 % 50 80-60 800 % 50 40-20 600 % 50 60-40 1.
C The program which is selected first will go on even if the program selection button is moved and another program mode is selected while the machine is operating. You must cancel the ongoing program in order to change the drying program. (See, Ending the program through canceling) Auxiliary function Low temperature This function allows for drying at lower temperatures and therefore saves energy. Warning LED will light up when you select the function.
program. To cancel any selected program; • Press “Start/Pause/Cancel” button for about a duration of 3 seconds. The “Filter cleaning” and “Water tank” warning LEDs as well as the “0” warning LED on the program follow-up indicator will light up at the end of this period for reminding purposes. A As the inside of the machine will be excessively hot when you cancel the program while the machine is running, activate the ventilation program to cool it down.
5 Maintenance and cleaning Fluff filter Lint and fibres released from the laundry to the air during the drying cycle are collected in the “Fluff Filter”. C Such fibre and lint are generally formed during wearing and washing. C Always clean the filter after each Drying process. C You can clean the filter and filter area by vacuum cleaner. For Filter cleaning; 1 Open the cover 2 Remove the fluff filter by pulling it up and open the filter.
6 Solution suggestions for problems Problem Cause Explanation / Suggestion Drying process takes too much time. Cover filter and filter drawer might have * Clean the cover filter and Filter drawer. not been cleaned. * Cover filter and filter drawer might Laundry come out wet have not been cleaned. at the end of drying. * Excessive laundry might have been loaded in. * It might have not been plugged in. * The loading door may be ajar.
