Troubleshooting guide

142468
•
Place the appliance in dry and well aired room.
The appliance operates best at temperature
ranges indicated in the chart below. Relevant
class of the appliance is indicated on the rating
plate.
Positioning the appliance requires two persons in
order to avoid injuries or damage to the appliance.
•
Place the appliance fl atly and fi rmly on a solid
base. The appliance is fi tted with adjustable feet
on the front side, used to level the appliance.
Rear side of the appliance is fi tted with wheels
(certain models only) facilitating the positioning of
the appliance at the preselected place.
•
The element above the appliance must be at
least 5 cm away to allow suffi cient cooling of the
condenser.
•
Avoid exposing the appliance to direct sunlight
or heat sources. If this is not possible, install
insulation plate between the appliance and
adjacent heat source.
•
Bottom front corners of the appliance is fi tted
with handles to facilitate moving (certain models
only). The appliance may stand independently or
adjacent to a furniture element or wall. Be sure to
leave enough space for the opening of the door,
to avoid damage to the appliance or personal
injury. Also leave ample space for extracting
shelves (see installation diagram).
7
Class Ambient temperature
SN (subnormal) from +10°C to +32°C
N (normal) from +16°C to +32°C
ST (subtropical) from +16°C to +38°C
T (tropical) from +16°C to +43°C
Installation and connection
Selecting the location
Positioning the
appliance