EN User Manual Freezer UKS7220FNDP1
CONTENTS Safety information Safety instructions Operation Daily use Hints and tips 2 3 5 7 8 Care and cleaning Troubleshooting Installation Technical data 9 9 12 13 Subject to change without notice. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage.
Farm houses; staff kitchen areas in shops, offices and other working environments – By clients in hotels, motels, bed and breakfast and other residential type environments Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. Do not damage the refrigerant circuit.
• The appliance contains a bag of desiccant. This is not a toy. This is not food. Please dispose of it immediately. • Electrical connection • WARNING! Risk of fire and electric shock. • The appliance must be earthed. • Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. • Always use a correctly installed shockproof socket. • Do not use multi-plug adapters and extension cables.
• Remove the door to prevent children and pets to be closed inside of the appliance. • The refrigerant circuit and the insulation materials of this appliance are ozonefriendly. • The insulation foam contains flammable gas. Contact your municipal authority for information on how to discard the appliance correctly. • Do not cause damage to the part of the cooling unit that is near the heat exchanger.
If "dEMo" appears on the display, refer to "Troubleshooting" . Switching off 1. Press the appliance ON/OFF for 5 seconds. The display switches off. 2. Disconnect the mains plug from the power socket. Temperature regulation Set the temperature of the appliance by pressing the temperature regulators. Default set temperature: • -18°C for the freezer The temperature indicators show the set temperature. The set temperature will be reached within 24 hours.
The DrinksChill indicator flashes. The Timer shows the set value (30 minutes) for a few seconds. 2. Press the Timer regulator to change the Timer set value from 1 to 90 minutes. 3. Press OK to confirm. TheDrinksChill indicator is shown. The Timer start to flash (min). At the end of the countdown the DrinksChill indicator flashes and an audible alarm sounds. Press OK to switch off the sound and terminate the function. To switch off the function repeat the procedure until the DrinksChill goes off.
Ice-cube production This appliance is equipped with one or more trays for the production of ice-cubes. Do not use metallic instruments to remove the trays from the freezer. 1. Fill these trays with water 2. Put the ice trays in the freezer compartment. Cold accumulators The freezer contains at least one cold accumulator which increases storage time in the event of a power cut or breakdown.
CARE AND CLEANING WARNING! Refer to Safety chapters. General warnings CAUTION! Unplug the appliance before carrying out any maintenance operation. This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians. The accessories and parts of the appliance are not suitable for washing in a dishwasher. Periodic cleaning CAUTION! Do not pull, move or damage any pipes and/or cables inside the cabinet.
What to do if... Problem Possible cause Solution The appliance does not op‐ erate. The appliance is switched off. Switch on the appliance. The mains plug is not con‐ nected to the mains sock‐ et correctly. Connect the mains plug to the mains socket correctly. There is no voltage in the mains socket. Connect a different electrical appliance to the mains socket. Contact a qualified electrician. The appliance is noisy. The appliance is not sup‐ ported properly.
Problem Possible cause Solution The "FastFreeze" is switched on. Refer to "FastFreeze function". There is too much frost and ice. The door is not closed cor‐ rectly or the gasket is de‐ formed/dirty. Refer to "Closing the door". The compressor does not start immediately after pressing the "FastFreeze", or after changing the tem‐ perature. This is normal, no error has occurred. The compressor starts after a period of time. Water flows on the floor.
INSTALLATION Electrical Connection Location Refer to the assembly instructions for the installation. To ensure best performance, install the appliance well away from sources of heat such as radiators, boilers, direct sunlight etc. Make sure that air can circulate freely around the back of the cabinet. Positioning Install the appliance in a dry, well ventilated indoors where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance.
3. Connect the wire coloured brown to the terminal either marked with the “L“ or coloured red. 4. Check that no cut, or stray strands of wire is present and the cord clamp (E) is secure over the outer sheath. Make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. 5. Switch on the appliance. The appliance is supplied with a 13 amp fuse (B). In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.
222375070-A-492017