Instruction manual

CARE AND MAINTENANCE

1. ROUTINE MAINTENANCE

Cleaning your Smeg product is quick and simple. Even though the non-porous

surface prevents liquids penetrating into the material, it is preferable to remove them

immediately using a soft, non-abrasive sponge and standard dish detergent. You

should then rinse the surface and dry it carefully using a microfibre cloth.

2. NON-ROUTINE MAINTENANCE

Cleaning stubborn stains is not difficult: all you need to do is choose the right product

and use it correctly.

For stubborn stains on LIGHT-COLOURED products, you can use a solution of bleach

and warm water (¾ to ¼), leaving it to act for eight hours (we recommend that this

cleaning be performed during the night). Afterwards, rinse thoroughly and dry the

entire surface carefully using a microfibre cloth. If the stains remain, the operation can

be repeated one or two more times.

For stubborn stains on DARK-COLOURED products, you can remove them directly

with a soft, non-abrasive sponge and standard dish detergent, using small circular

movements. When finished, rinse using warm water and carefully dry the entire surface

using a microfibre cloth. If the stains remain, the operation can be repeated one or

two more times.

To remove limescale stains, we recommend the use of a non-corrosive descaling

product diluted with warm water. Distribute the solution uniformly over the entire

surface of the product. Clean with a soft, non-abrasive sponge using small circular

movements and leave the product to act for several minutes (follow the instructions

and conditions for use on the product label). When finished, rinse using warm water

and dry carefully using a microfibre cloth.

Failure to follow the cleaning and maintenance instructions stated in this manual may invalidate the

standard warranty provided by the manufacturer.