Operating Instructions and Installation Instructions

3. USE

3.3.2 Electronic ignition hotplate (depending on model)

WARNING

Make sure there are no pans or any other objects on the burners when igniting.

To ignite the burner, gently push in and turn the control knob to position HIGH FLAME and, keeping the knob

pushed in, at the same time press the electronic ignition pushbutton. Once the burner is lit, keep the knob

pushed in for a few seconds to ensure the flame remains lit.

CAUTION

If the burner does not ignite immediately repeat ignition after having followed each

step below:

• Turn the knob to “Low flame ”

• Proceed with manual ignition

• Check there is sufficient gas in the gas bottle.

If the appliance still does not ignite shut off the gas supply at the main gas tap and

contact your local dealer.

3.3.3 Manual ignition hotplate

Manual ignition when the appliance is not fitted with the electronic ignition feature or in the event of failure

in the electronic ignition.

WARNING

Make sure there are no pans or any other objects on the burners when igniting.

To ignite the burner, gently push in and turn the control knob to position HIGH FLAME and, keeping the knob

pushed in, at the same time light the burner with a match or gas lighter. Once the burner is lit, keep the knob

pushed in for a few seconds to ensure the flame remains lit.

CAUTION

If the burner does not ignite immediately, check there is sufficient gas in the gas

bottle.

If the appliance still does not ignite, shut off the gas supply at the main gas tap and

contact your local dealer.

3.3.4 Hotplate flame regulation

To regulate the flame turn the knob to the desired cooking flame.

3.4 Oven

CAUTION

The oven burner must be ignited only with the oven door fully open.

WARNING

The wire shelf, drip tray and oven dish when in the oven must be positioned so as to

avoid coming into contact with the flames.

If the burner flame goes out accidentally, turn off the gas knob and wait one minute

before re-igniting.