Typewriter User Manual

BASIC FEATURES

Selecting Pitch

There are three pitches available for typing the

CODE

(PITCH) key is used to

change the typing pitch. When the typewriter is turned on. PICA mode is selected.

The selection sequence is the following:

PICA ELITE MICRO PICA

The chosen pitch will be displayed.

PICA (10) : 10 characters per inch

ELITE (12) : 12 characters per inch

MICRO (15) : 15 characters per inch

Selecting Line Spacing

There are three line spacing settings availble - 1, 1 1/2, 2.

The

CODE

+ (LINE SPACE) key is used to select line spacing.

The default mode is single (1) when the typewriter is turned on.

The selection sequence is the following:

1 1 1/2 2 1

The chosen line spacing will be displayed.

Setting Impression

You can choose one of three hammer impression levels - Light, Medium and Heavy.

The

CODE

(IMP) key is used to set the impression level.

The Light level is selected initially.

The selection sequence is the following:

Light Medium Heavy Light

The chosen impression level will be displayed.

Setting Margins

You may freely adjust the margins. The minimum distance between the left and right

margins is one inch.

• Left Margin

Move the carrier to the desired left margin position and press the

MAR L

key.

• Right Margin

Move the carrier to the desired right margin position and press the

CODE

MAR R

key.

▲

-7-