User Guide

4-16 — Memory Mode Smith Corona Corporation

Canceling a Block Delete, Move or Copy

If you decide not to delete, move, or copy text after you have marked it,

you have the option to “unmark” the text and cancel the procedure.

1. Position the cursor on either caret or anywhere inside the area

marked by carets.

2. Press Code + Mark (M). This procedure is canceled, and the text

remains unchanged.

Changing Pitch

The Pitch settings stored in the text, EXCEPT the first one, are treated

like individual characters and can be deleted or inserted. The first one

can only be changed, not deleted or inserted.

To change the pitch for the entire document, return to the beginning of

the document before following the instructions below. If you are

changing a portion of the document, follow the instructions below.

1. Position the cursor under the first character to be printed in the

new pitch.

2. Press Code + Format (+/=) to access Format, and press Return to

select Pitch. (If the arrow already points to the pitch desired, you

have to re-select that pitch to enter it into your document.)

3. Press the Spacebar to select the desired pitch.

4. Press Code + Format (+/=) to deactivate Format feature.

NOTE: If you change pitch in the middle of your text, you may

wish to enter a Stop Code so that printing halts to allow

you to insert another printwheel. Pitch can also be

changed when editing text.

Changing Margins and Tabs

You may change tabs and margins when you recall a document (see

“Recalling a File”). To make either change, follow the instructions below.

1. Recall the document, and the display will prompt:

Chg Mar/Tabs? Y/N

2. Press Y, and the margin and tab set display will appear. Press N to

go directly into the file.

3. Make the changes, and press Return.

Position Cursor

Code

Half Space

Code

Recall Document

Make Changes

Reloc

Return

Format