User Guide

Smith Corona Corporation Memory Mode — 5-21
Editing a Form File
If you realize that you have made a mistake when entering Stop Codes
or text in a form, you can go back and edit the form file.
1. Recall the form file as you would any other document. Only one line
of text will be displayed at a time.
2. Automatically insert the pre-printed form. Make sure the form is
aligned with the paper alignment mark.
3. Press Advance, then a curosr key to move through the entries.
4. Make corrections, using Correct, WordEraser, and LineEraser. Text
on the display and on the page will be corrected.
5. Close the file when finished by pressing Code + Menu.
IMPORTANT: Do not use the platen knob to adjust the paper. Use
the keys noted in “Creating a File for a Pre-printed
Form.”
Filling in a Form
When it comes time to use the form again, you can recall the form file
and fill it in quickly and easily, without having to worry about the
alignment.
1. Move Mode Selector to Mem Mode. The display prompts:
2. Automatically insert the form. Be sure to correctly align the form
with the Paper Alignment Mark.
3. Type the name of the file you wish to print, or press the Code + ( )
until the correct file name appears on the display. While scrolling
through the file directory, the second line on the display identifies a
form file with the prompt:
Form File
4. Press Return to recall the file. The display illustrated below appears:
NOTE: Only Print, Edit, and Erase functions can be done in
this mode.
continued…
End of Page Pitch Line Impression Keyboard
Print Edit Erase Copy
End of Page Pitch Line Impression Keyboard
File: 20000
RETURN to Enter/CURSOR for Directory
THEN
,
,
THEN
THEN
?
/
M
THEN
.
.
Margin L/R
Advance
Margin L/R
Advance
Margin L/R
Advance
Margin L/R
Advance