Use and Care Manual

8
1. Pry up the hinge cover (1) and hinge cap (2) using a flat head screwdriver. Using a Phillips
head
screwdriver, loosen the hinge screws (3a) and remove the top hinge (4). You can now lift the
door (5) off the bottom hinge and set it off to one side. Be careful not to lose the washer
(11) between the bottom hinge and the door. You will need this later. Also remove lock hole
cap (6) and screws (7) and (8) from the top of the door. The lock cap can be pried up using