Instructions / Assembly

2. Assemble 18” Extension

Remove cap and place check valve inside of extension.

Then place 4-way nozzle on extension and fasten tightly.

(See Figure C)

Note: Check valve must always be used.

Figure B

4. Assemble Wand to Shut-o

Screw on Wand Assembly to SS Shut-o

(See Figure E)

3. Assemble Shut-o to Hose

Screw on SS Shut-o to end of hose from sprayer

(See Figure D)

Figure D

182465 SS Shut-o

Sprayer Hose

Figure E

Wand Assembly

182465 SS Shut-o

1. Assemble Hose To Tank

IMPORTANT: Do not attempt to heat or alter hose

or hose nut.

1. Align hose and screw on to tank. (See Figure A).

2. Tighten with two 5/8” wrench. (See Figure B).

Figure A

Check Valve

182659 12” EXTENSION”

Figure C

Extension cap

Option Nozzle: Please refer to manual for

options of nozzles for your sprayer.

SETTING UP YOUR S100

STAINLESS PROFESSIONAL SPRAYER

190441

PAGE 1
SETTING UP YOUR S100 STAINLESS PROFESSIONAL SPRAYER 190441 1. Assemble Hose To Tank IMPORTANT: Do not attempt to heat or alter hose or hose nut. 1. Align hose and screw on to tank. (See Figure A). 2. Tighten with two 5/8” wrench. (See Figure B). Figure A Figure B 182659 12” EXTENSION” 2. Assemble 18” Extension Remove cap and place check valve inside of extension. Then place 4-way nozzle on extension and fasten tightly. (See Figure C) Note: Check valve must always be used.
PAGE 2
PARTS INCLUDED WITH YOUR S100 SPRAYER 190441 182786 CHECK VALVE 182639 ASSEMBLY 12” SS EXTENSION 182643 SEAL KIT S100 182570 HOSE 50” 182379 4-WAY BRASS NOZZLE 182465 SS SHUT-OFF COMPRESSION SPRAYER Use and Care Manual Lifetime Limited Warranty On Tank and Frame, 1 year on parts and accessories. Garantia limitada de por vida ensamblaje de tanque 1 año de garantía en piezas y accesorios. Garantle limitée á vie assemblage de réservoir Garantie1 an sur les piéces et accessoires.