Manual

32
INSIGHT
®
LASER SAFETY PRECAUTIONS CONT’D
WARNING: DO NOT USE THE INSIGHT
®
LASER IN
ENVIRONMENTS CONTAINING AN EXPLOSIVE ATMOS-
PHERE OR IN AREAS WHERE GASOLINE, PAINTS,
SOLVENTS, OR OTHER FLAMMABLE LIQUIDS ARE STORED.
Before use, inspect all pieces of equipment for any damage such as
cracks, loose parts, or other visible defects. If any damage or defects
are noted, contact Smith & Wesson for help:
CONTACT SMITH & WESSON CUSTOMER SERVICE
Tel: [phone] • 413-781-8300 ext. 2905
E-mail: [e-mail]
RETURNS FOR SERVICE
- FOR ISSUES INVOLVING THE
LASER SIGHTING DEVI CE
Smith & Wesson
2100 Roosevelt Avenue
Springfield, MA 01104
REMOVE / INSTALL
INSIGHT
®
LASER
WARNING: ENSURE YOUR FIREARM IS UNLOADED
BEFORE ADJUSTMENT OF THE INSIGHT
®
LASER.
AT ALL TIMES FOLLOW THE BASIC FIREARMS SAFE-
TY RULES IN THE SECTION ENTITLED “YOUR SAFETY
RESPONSIBILITIES”.
The Insight
®
Laser must be
removed from the firearm
before inspecting, cleaning,
replacing batteries, or per-
forming other maintenance
functions.
• Loosen the captive hex
screw completely by turn-
ing it counterclockwise as
viewed from the front of
the sight (Figure A2). This
screw holds the Insight
®
Laser to the frame.
• After the hex screw is fully
loosened, remove the
Insight
®
Laser from the
frame by pulling it out and
away from the frame of
the BODYGUARD
®
38 (Figure A3).
FIGURE A2
FIGURE A3