Manual

34
INSIGHT
®
LASER
PUSH-BUTTON
WARNING: VISIBLE LASER RADIATION EMITS FROM
THE INSIGHT
®
LASER WHILE IN OPERATION – AVOID
DIRECT EYE EXPOSURE.
The push-button to turn the
laser on and off is located at
the top rear of the sight hous-
ing (Figure A8).
The table below illustrates
modes of operation for the
Insight
®
Laser and the input
required to activate them.
The Insight
®
Laser is equipped with a five minute auto-off timer. After
five minutes (±15 seconds) of continuous activation, the laser will
begin to flash at a 2 hz rate. This is true even if the Insight
®
Laser is
being operated in Pulse Mode. If the push-button is not pressed with-
in approximately 20 seconds, the laser will shut OFF until the push-
button is reengaged.
FIGURE A8
ON/PULSE/OFF PUSH-BUTTON TABLE
Push-Button Behavior
Mode User Input Result
On Push-Button 1x Constant Laser
Pulse Push-Button 2x Pulse Laser
Off Push-Button 3x Off
PUSH BUTTON