Product Manual

Assembly and Mounting
Instructions
for Outboard Motor Dolly
27580
cesmith.com
TOOLS REQUIRED
2- 17mm Wrenches
1- 13mm Wrench
1- 12mm Wrench
1. Insert and tighten bolts as shown in Figure 1.
2. Install axle and wheels, with washers on both
sides of wheel. Insert the cotter pin and bend.
3. You can now mount your motor that weighs
no more than 250 lbs.
4. To store motor dolly remove bolts Location A,
fold the top half down the insert and tighten the
bolt to Location B for bolt storage, as shown in
Figure 2.
Please visit
www.cesmithco.com
to see more products and
information.
Figure 1
Figure 2
A
B
Created 4/21/2017