PARTS & SERVICE MANUAL SWEEP STAR V62 With Electric Clutch Models 78-200-A Starting Serial # 78060 SMITHCO PRODUCT SUPPORT 1-800-891-9435 Hwy SS and Poplar Avenue, Cameron WI 54822 E-mail: productsupport@smithco.
Introduction CONTENTS Introduction .......................................... 1-10 Service Diagrams Parts Accessories Reference Introduction ................................................................................... 1-3 Safe Practices ............................................................................. 2 Specifications .............................................................................. 3 Optional Equipment .....................................................................
Thank you for purchasing a product. Read this manual and all other manuals pertaining to the Sweep Star V62 carefully as they have safety, operating, assembly and maintenance instructions. Failure to do so could result in personal injury or equipment damage. Keep manuals in a safe place after operator and maintenance personnel have read them. Right and left sides are from the operator’s seat, facing forward. All machines have a Serial Number and Model Number. Both numbers are needed when ordering parts.
SAFE PRACTICES Introduction 1. It is your responsibility to read this manual and all publications associated with this machine (engine, accessories and attachments). 2. Never allow anyone to operate or service the machine or its attachments without proper training and instructions. Never allow minors to operate any equipment. 3. Learn the proper use of the machine, the location and purpose of all the controls and gauges before you operate the equipment.
WEIGHTS AND DIMENSIONS Length Width Height Weight 151" (384 cm) 68" (172 cm) 87" (221 cm) 1500 lb (680 kg) SOUND LEVEL At ear level At 3 ft (0.914 m) At 30 ft (9.14 m) 98 dB 104 dB 86 dB ENGINE Make Model# Horsepower Fuel Cooling System Lubrication System Alternator TIRES & WHEELS Introduction SPECIFICATIONS FOR SWEEP STAR V62 Kawasaki FD661D 22 Hp (16 kW) Unleaded 87 Octane Gasoline Minimum Liquid Cooled Full Pressure 20 Amp Two 24 x 13.00 x 12 NHS (18 psi (1.3 bar)) Castor: 9 x 3.5 x 4 (20 psi (1.
MAINTENANCE Before servicing or making adjustments to machine, stop engine and remove key from ignition. Use all procedures and parts prescribed by the manufacturer's. Read the engine manual before operation. Service LUBRICATION Use No. 2 General Purpose Lithium Base Grease and lubricate every 100 hours. The Sweep Star V62 has seventeen grease fittings. All bearings are sealed bearings. When inserting grease, be careful not to ruin the seal, if this happens, replace the bearing at once.
MAINTENANCE (CONTINUED) ENGINE OIL KAWASAKI Change and add oil according to chart below. Do not overfill. Use a high quality detergent oil. For Kawasaki engine API Service Classification: SJ or higher. Use no special additives with recommended oils. Do not mix oil with gasoline. SAE VISCOSITY GRADES Starting Temperature Range Anticipated Before Next Oil Change Use of multi-viscosity oils (10W-30, etc) will result in increased oil consumption. Check oil level more frequently if using these types of oils.
MAINTENANCE (CONTINUED) BATTERY Batteries normally produce explosive gases which can cause personal injury. Do not allow flames, sparks or any ignited object to come near the battery. When charging or working near battery, always shield your eyes and always provide proper ventilation. Battery cable should be disconnected before using “Fast Charge”. Charge battery at 15 amps for 10 minutes or 7 amps for 30 minutes. Do not exceed the recommended charging rate.
OVERLOADING DEBRIS HOPPER AND WEAR ON VACUUM HOUSING OVERLOAING DEBRIS HOPPER Smithco Sweeper-Vacs are designed to carry the following maximum loads: Model 72-000 Big Vac 1500 lbs. (608 kg) Model 78-200 & 78-500 Sweep Star V62 860 lbs. (400 kg) PLEASE NOTE THE FOLLOWING: 1. Loads heavier than that will damage the unit. 3. Overloading is particularly easy when collecting aerifier cores. 4.
SERVICE CHART Before servicing or making adjustments to the machine, stop engine, set park break, block wheels and remove key from ignition.
Service Every 500 Hours/Yearly 400 Hours 300 Hours 250 Hours 200 Hours 100 Hours As Required Daily END USER'S SERVICE CHART ¤£ Engine Oil Engine Oil Filter Engine for Leaks and Loose Parts ‡ Air Cleaner (Paper Element) ‡ Air-Cleaner (Foam Element every 25 hours) Spark Plugs (Clean and Gap/Replace) Valve Clearance Idle Speed ‡ Cooling System Belts and Hoses * Tire Pressure Visual Inspection of Tires Fuel Level Fuel Filter Hydraulic Oil †Hydraulic Oil Filter Hydraulic System for Leaks and Loose Part
ADJUSTMENTS Service ADJUSTMENT OF BELT TENSIONER There are two belt tensioners on the Sweep Star V62. One controls the tension on the belt from the engine to blower shaft the other controls the belt on the finger or brush reel. The proper tension of the idler should be 12 to 15 as per the gauge (A) on the side of the tightener. Over tightening the belt will shorten the life of the belt and the machine may not perform to the best of its ability. To adjust belt tensioner, loosen bolt holding tensioner.
NOTES 11
WIRING DRAWING Diagrams 12
WIRING PARTS LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PART# DESCRIPTION 78-342 12-017 78-343 12-016 76-310 8935 78-340 78-341 Wire, Hour Meter to Ground Hour Meter Wire, Hour Meter to Buss Bar Ignition Switch Key Set (comes with 12-016) Buss Bar Oil Light Temperature Light Fuel Pump (Part of Engine) Wire Harness (includes all wire colors with *) Battery Cable Black Battery (optional) Red Battery Cable with Boot Circuit Breaker Wire 30 Amp Circuit Breaker Circuit Breaker Boot Electric Clutch Toggle Sw
HYDRAULIC DRAWING Diagrams HYDRAULIC SCHEMATIC 14
HYDRAULIC PARTS LIST PART# DESCRIPTION 1 2 3 78-247 78-220 23-006 23-031 78-249 78-250 78-306 78-246 78-248 13-584 8917-14 18-222 78-251 78-219 78-225 Hydraulic Hose (brush motor to valve) Hydraulic Pump Oil Filter Filter Element (replacement only) Hydraulic Hose (pump to valve) Hydraulic Hose (return to tank ) 2-Bank Hydraulic Valve Hydraulic Hose (rear hyd. cyl. to front valve) Hydraulic Hose (front hyd. cyl. to rear valve) Oil Tank Suction Hose 5/8 ID x 14 Hose Clamp Hydraulic Hose (case drain hyd.
BODY AND FRAME DRAWING Parts 16
BODY AND FRAME PARTS LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 25 26 27 28 29 30 31 32 33 34 PART# DESCRIPTION HSTP-14-20-075 78-253 78-274 78-315 78-274 HB-516-18-075 HNFL-516-18 HBFL-516-18-075 HNFL-516-18 78-260 78-225 78-242-01 78-265 78-272 78-319 HNCL-12-13 HN-12-13 HW-12 HB-12-13-250 78-266 HNFL-38-16 78-264 19-205 HB-38-16-575 78-316 78-274 HB-516-18-075 HNFL-516-18 78-339 78-274 78-216 78-221 78-221-01 78-221-02 HNL-12-20 HB-12-13-150 HW-12 HNTL-12-13 78-270 78-240 7
ENGINE AND CONTROLS DRAWING Parts 18
ENGINE AND CONTROLS PARTS LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 PART# DESCRIPTION HSM-10-32-063 HWL-10 HN-10-32 34-159 78-281 78-217 HSTP-14-20-075 HNFL-14-20 HSM-8-32-050 HWL-8 HN-8-32 78-337 HN-38-24 12-016 78-306 42-226 HB-14-20-200 HW-14 HNFL-14-20 78-342 HN-14-20 78-343 12-017 11-086 78-341 78-340 HG-18-45 18-339 HSTP-14-20-075 HNFL-14-20 78-317 78-254 78-307 18-338 78-324 8935 HSM-8-32-075 HWL-8 HN-8-32 Machine Screw #10 - 32 x 5/8 Lockwasher #10 Nut #10 - 32 Thr
ENGINE AND CONTROLS DRAWING Parts 20
ENGINE AND CONTROLS PARTS LIST 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 PART# DESCRIPTION 10-197 18-220 50-403 HSSHS-38-16-063 78-235 78-232 HKSQ-14-100 78-218 34-169 15-314 15-472 78-368 76-340 HB-516-18-125 HW-516 HNTL-516-18 78-370 HB-38-16-175 HWL-38 Exhaust Pipe Muffler Clamp 11/4 In-line Fuel Filter Set Screw 3/8 - 16 x 5/8 (part of 78-235) Hub 11/8 Pulley Machine Key 1/4 x 1/4 x 1 Engine, 22 HP Kawasaki Coolant Tank Kit (part of engine) Toggle Switch Switch Boot Electric Clutch Clutch Strap
PULLEY AND PUMP DRAWING Parts 22
PULLEY AND PUMP PARTS LIST 1 2 3 4 5 6 7 8 9 10 11* 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 * PART# DESCRIPTION HB-12-13-250 HMB-12-14 78-275 HNCL-12-13 16-013 78-224 HBM-10-1.
BLOWER AND VACUUM HOUSING DRAWING Parts 24
BLOWER AND VACUUM HOUSING PARTS LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 PART# DESCRIPTION 15-492 15-491 78-379 78-403 78-375 78-402 18-338 18-269 18-027 78-223 78-336 HKSQ-14-100 HB-716-14-150 HNTL-716-14 HSTP-14-20-075 HNFL-14-20 HBF-516-18-075 HNFL-516-18 78-301 78-347 15-020 78-243 HB-38-16-100 HNFL-38-16 78-276 78-257 8803-80 78-293 15-039 8800-30 18-186 HB-14-20-075 HWL-14 HW-14 18-042 78-378 HB-516-18-100 HNFL-516-18 78-355 HLC-58 Cap w/ Gauge Gas Tank, 5 Ga
FINGER REEL DRAWING Parts 26
FINGER REEL PARTS LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 PART# DESCRIPTION HMB-58-14 HN-58-11 HB-58-11-300 HNTL-58-11 HG-14-28-45 78-241 78-284 20-018 15-020 HB-38-16-125 HNTL-38-16 78-286 78-283 20-018 78-285 8820-8 HCP-34-250 HB-14-20-075 HNFL-14-20 78-344 78-271 HB-12-13-600 78-322 42-213 42-212 HMB-34-10 HNTL-12-13 72-056 HST-14-20-075 HNFL-14-20 42-202 42-202-01 42-202-02 78-287 78-327 78-242 HKSQ-14-100 78
BRUSH REEL DRAWING Parts 28
BRUSH REEL PARTS LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 PART# DESCRIPTION HMB-58-14 HN-58-11 HB-58-11-300 HNTL-58-11 HG-14-28-45 78-241 78-284 20-018 15-020 HB-38-16-125 HNTL-38-16 78-286 78-283 20-018 78-285 8820-8 HCP-34-250 HHP-18 HB-14-20-075 HNFL-14-20 78-344 78-271 HB-12-13-600 78-322 42-213 42-212 HMB-34-10 HNTL-12-13 72-056 HST-14-20-075 HNFL-14-20 HKSQ-14-100 78-348 78-321 42-202 42-202-01 42-202-02 78-392 HG-14-28-18
REEL & HYDRAULIC PUMP DRAWING Parts 30
REEL & HYDRAULIC PUMP PARTS LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29* 30 31 32 33 * PART# DESCRIPTION 18-246 78-228 78-229 18-334 18-009 18-333 HWK-316-063 78-259 HB-38-16-150 HNFL-38-16 78-232 78-237 HSSHS-38-16-063 16-013 HB-12-13-250 HMB-12-14 78-226 72-058 HBFL-516-18-075 HNFL-516-18 72-056 HST-14-20-075 HNFL-14-20 78-351 HSSHS-38-16-063 78-222 HB-38-16-125 HNFL-38-16 HKSQ-14-100 76-275 HB-38-16-100 HNFL-38-16 HNCL-12-13 78-224 HBM-10-1.
HOPPER DRAWING Parts 32
HOPPER PARTS LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 PART# DESCRIPTION 78-305 HBFL-516-18-075 HNFL-516-18 78-272 78-395 HB-14-20-125 HNFL-14-20 78-384 HSM-8-32-150 78-280 78-345 HSTP-14-20-075 HNFL-14-20 78-279 78-260 78-262 78-304 HWL-14 HN-14-20 HBFL-38-16-075 HNFL-38-16 22-073 78-273 78-255 48-115 HSTP-14-20-075 78-263 78-389 78-282 78-292 78-388 78-264 78-291 78-265 HB-12-13-150 HW-12 HNTL-12-13 HMB-34-10 HP-18-150 78-319 HB-38-16-175 H
78-306 2-BANK VALVE DRAWING Parts 34
78-306 2-BANK VALVE PARTS LIST 1* 2* 3* 4 5 6* 7* 8* 9 10* 11* 12* 13* 14* 15* 16*† 17*† 18*† 19 20 21 22* * † PART# DESCRIPTION 14-106 78-306-01 13-261-03 18-169 18-202 13-261-07 13-261-06 13-261-05 18-168 78-306-02 14-203 13-261-02 42-220-01 14-088 78-306-03 42-220-04 42-220-05 42-220-03 42-220-07 42-226 42-220-08 HNJ-516-18 42-220-06 Relief Assembly Kit Seal Kit N.R.
REAR AXLE / ELELCTRIC BRAKE DRAWING Parts 36
REAR AXLE / ELECTRIC BRAKE PARTS LIST REF# 1 2 3 4 5* 6 7* 8 9 10 11 PART# DESCRIPTION 78-216 78-216-02 78-406 HP-18-200 78-119 HNAR-100-14 80-167 HNL-12-20 78-409 HN-716-20 HWL-716 78-408 Axle Complete Grease Seal Hub Assembly (includes all * items) Cotter Pin 1/8 x 2 Bearing Cup and Cone Slotted Jam Nut 1 - 14 Grease Cap Lug Nut 1/2 - 20 RH Brake Assembly Nut 7/16 - 20 Lockwasher 7/16 LH Brake Assembly QUANTITY 1 2 2 2 2 2 2 10 1 8 8 1 78-410 Wire Harness 1 INSTALLATION INSTRUCTIONS 1.
78-201 REPLACEMENT BRUSH REEL DRAWING 78-202 REPLACEMENT FINGER REEL DRAWING Accessories 38
78-201 REPLACEMENT BRUSH REEL PARTS LIST REF# 1 2 3 4 5 6 PART# DESCRIPTION 78-222 HB-38-16-125 HNFL-38-16 HG-14-28-180 78-348 HKSQ-14-100 78-321 Mounted Bearing Bolt 3/8 - 16 x 11/4 Flange Whiz Lock Nut 3/8 - 16 Grease Fitting 1/4 -20 x 180° (comes with 78-222) Spiral Brush Shaft Machine Key 1/4 x 1/4 x 1 Spiral Brush QUANTITY 2 8 8 2 1 2 1 78-202 REPLACEMENT FINGER REEL PARTS LIST 1 2 3 4 5 6 7 8 9 10 11 PART# DESCRIPTION HB-38-16-125 HNFL-38-16 78-222 HG-14-28-180 HKSQ-14-100 78-303 8969-5.
78-205 REMOTE VACUUM HOSE DRAWING Accessories 40
78-205 REMOTE VACUUM HOSE PARTS LIST REF# 1 2 3 4 5 6 7 8 9 10 11 PART# DESCRIPTION HBFL-516-18-075 HNFL-516-18 78-318 HBFL-516-18-075 HNFL-516-18 78-314 78-311 18-340 8970-150 HB-14-20-150 HNTL-14-20 78-350 8803-17 78-354 15-019 Flange Bolt 5/16 - 18 x 3/4 Flange Whiz Lock Nut 5/16 - 18 Hose Rack Flange Bolt 5/16 - 18 x 3/4 (part of machine) Flange Whiz Lock Nut 5/16 - 18 (part of machine) Remote Hose Connector Handle Stop (part of machine) Hose Clamp Vacuum Hose 8" x 150" Bolt 1/4 - 20 x 11/2 Lock Nut
78-204 5TH WHEEL HITCH DRAWING Accessories 42
78-204 5TH WHEEL HITCH PARTS LIST REF# 1 ` 2 3 4 5 6 7 8 9 10 11 PART# DESCRIPTION HB-516-18-100 HNTL-516-18 HB-38-16-225 78-352 HST-14-20-075 HNFL-14-20 78-353 HB-516-18-150 HNTL-516-18 HB-12-13-125 HNTL-12-13 78-391 HNW-38-16 HW-38 HNTL-38-16 78-390 Bolt 5/16 - 18 x 1 Lock Nut 5/16 - 18 Bolt 3/8 - 16 x 21/4 Control Panel Mount Truss Head Machine Screw 1/4 - 20 x 3/4 (part of machine) Flange Whiz Lock Nut 1/4 - 20 (part of machine) Hose Hold Down Bolt 5/16 - 18 x 11/2 Lock Nut 5/16 - 18 Bolt 1/2 - 13 x
78-206 CLEVIS HITCH DRAWING Accessories 44
78-206 CLEVIS HITCH PARTS LIST REF# 1 2 3 4 5 6 7 8 9 10 11 PART# DESCRIPTION 78-244 78-268 78-267 HB-12-13-350 HNTL-12-13 HBFL-516-18-075 HNFL-516-18 78-299 78-295 15-020 78-298 78-312 HSTP-14-20-075 HNFL-14-20 HB-12-13-125 HNTL-12-13 HB-58-18-450 HNCL-58-18 3 QUANTITY /4" Clevis Hitch Insert Tongue Bolt 1/2 - 13 x 31/2 Lock Nut 1/2 - 13 Flange Bolt 5/16 -18 x 3/4 Flange Whiz Lock Nut 5/16 -18 Adjustment Slide Adjustment Lock Hand Grip Control Panel Adjustment Control Panel Mount Phillips Truss Mach
78-209 BALL HITCH DRAWING Accessories 46
78-209 BALL HITCH PARTS LIST REF# 1 2 3 4 5 6 7 8 9 10 11 PART# DESCRIPTION 78-356 78-268 78-267 HBFL-516-18-075 HNFL-516-18 78-299 78-295 15-020 78-298 78-312 HST-14-20-075 HNFL-14-20 HB-12-13-125 HNTL-12-13 HB-58-11-450 HNCL-58-11 2" Ball Coupler Hitch Insert Tongue Flange Bolt 5/16 -18 x 3/4 Flange Whiz Lock Nut 5/16 -18 Adjustment Slide Adjustment Lock Hand Grip Control Panel Adjustment Control Panel Mount Truss Head Machine Screw 1/4 - 20 x 3/4 (part of machine) Flange Whiz Lock Nut 1/4 -20 (part o
78-207 HYDRAULIC LIFT KIT DRAWING Accessories 48
78-207 HYDRAULIC LIFT KIT PARTS LIST PART# DESCRIPTION HB-38-16-100 HNFL-38-16 HB-58-18-125 HNTL-58-18 HCP-12-150 78-357 18-223 HMB-100-10 78-365 78-364 HHP-18 18-169 78-364 13-292 HB-38-16-200 HW-38 HNTL-38-16 78-358 HSSHS-38-16-063 HKSQ-14-150 78-360 HMB-100-10 78-366 78-361 18-223 Bolt 3/8 - 16 x 1 Whiz Lock Nut 3/8 - 16 Bolt 5/8 - 18 x 11/4 Lock Nut 5/8 - 18 Clevis Pin 1/2 x 11/2 Right Hydraulic Lift Mount Flange Bushing (part of 78-357) Machine Bushing 1 x 10GA Adapter with Orifice Hydraulic Hose Br
78-363 3 - BANK HYDRAULIC VALVE DRAWING Accessories 50
78-363 3 - BANK HYDRAULIC VALVE PARTS LIST 1* 2* 3* 4 5 6 7* 8* 9* 10 11* 12* 13 14* 15* 16* 17* 18* 19 20 21 22* * PART# DESCRIPTION 14-106 14-205 13-261-03 14-088 42-227-01 18-169 13-261-07 13-261-06 13-261-05 18-202 14-203 78-306-02 18-168 13-261-02 78-306-03 42-220-04 42-220-05 42-220-03 HNJ-516-18 42-226 42-220-08 42-220-06 Relief Assembly Kit Seal Kit N.R.
78-203 HARD SURFACE SWEEPER DRAWING Accessories 52
78-203 HARD SURFACE SWEEPER PARTS LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 PART# DESCRIPTION 76-330 78-398 8869-1.
78-208 FILTER SYSTEM DRAWING Accessories 54
78-208 FILTER SYSTEM PARTS LIST 1 2 PART# DESCRIPTION 78-288 78-328 Filter Case Filter QUANTITY 1 1 Accessories REF# 55
78-210 &78-211 REEL AND HYDRAULIC PUMP DRAWING Accessories 56
78-210 &78-211 REEL AND HYDRAULIC PUMP DRAWING 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29* 30 * PART# DESCRIPTION 78-230 78-228 78-229 18-334 18-009 18-333 HWK-316-063 78-259 HB-38-16-150 HNFL-38-16 78-232 78-237 HSSHS-38-16-063 16-013 HB-12-13-250 HMB-12-14 78-226 72-058 HBFL-516-18-075 HNFL-516-18 72-056 HST-14-20-075 HNFL-14-20 78-351 HSSHS-38-16-063 78-222 HB-38-16-125 HNFL-38-16 HKSQ-14-100 76-275 HB-38-16-100 HNFL-38-16 HNCL-12-13 78-224 HBM-10-1.
78-210 NYLON BRUSH HEAD DRAWING Accessories 58
78-210 NYLON BRUSH HEAD PARTS LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 PART# DESCRIPTION HB-14-20-075 HNFL-14-20 78-344 HB-12-13-600 78-322 42-213 42-212 HMB-34-10 78-393 HB-38-16-200 HW-38 HNFL-38-16 72-056 HSTP-14-20-075 HNFL-14-20 HKSQ-14-100 78-348 78-321 HNTL-12-13 42-202 42-202-01 42-202-02 42-202-03 42-202-04 42-202-05 78-392 HG-14-28-180 18-223 72-136 HNFL-38-16 HB-38-16-125 78-222 42-539 72-053 8820-8 78-271 HCP-34-250 HHP-18 78-401 8803-80 78-241 Bolt 1/4 -
78-211 RUBBER FINGER HEAD DRAWING Accessories 60
78-211 RUBBER FINGER HEAD PARTS LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 PART# DESCRIPTION HB-14-20-075 HNFL-14-20 78-344 HB-12-13-600 78-322 42-202 42-202-01 42-202-02 42-202-03 42-202-04 42-202-05 42-213 HNTL-12-13 42-212 HMB-34-10 78-393 72-056 HSTP-14-20-075 HNFL-14-20 78-392 78-287 78-327 8969-5.
NOTES 62
DECAL LIST 16-088 Decal, Moving Parts/Hot Top Reel Belt Guard & Left Side Frame 17-128 Decal, Radiator Coolant Radiator Shield 25-004 Decal, Serial # Left Front Main Frame 25-277 Decal, Battery Warning Above Battery 25-286 Decal, Pinch Point 2 Ea.
QUICK REFERENCE REPLACEMENT FILTERS 23-031 50-403 34-112-01 34-112-02 Hydraulic Oil Filter Element In-Line Fuel Filter Engine Oil Filter Element Air Filter Element Assembly REPLACEMENT BELTS 34-112-03 78-227 78-226 Kawasaki# 59011-2056 Fan Belt (Engine) Belt, 3-Band (Engine To Blower & Pump) Belt, Single (3 Req'd) (Hydraulic Motor To Reel) SEAL KITS 78-219 78-219-01 78-219-02 Hydraulic Motor Seal Kit Buna N Compound Drive Coupler 78-220 78-220-01 78-219-02 Hydraulic Pump Seal Kit Buna N Compound Driv
LIMITED WARRANTY SMITHCO warrants this product to be free from defects in material and workmanship under normal use for one year from the date of purchase by the original user. (60 days if product is used for rental purposes.) All warranty claims must be handled through a SMITHCO authorized dealer or by SMITHCO, INC. All transportation charges must be paid by the purchaser. There is no further express warranty.
