Installation Manual

WWW.SMITTYBILT.COM

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 400 West Artesia Blvd, Compton, CA 90220

Installation Instructions

Jerry Can Holder

Application: Universal

Part # 2798

Parts Included Qty

Jerry Can Holder (Base) 1

Jerry Can Top Strap

This is a Universal Jerry Can Bracket. It can be mounted in a variety of places. (Truck beds, trailers,

bumpers, roof racks, ect..) Due to this no hardware is included.

Step 1: Determine the location you want to mount your bracket. Make sure bracket is flush against

mounting surface. (Fig A)

Step 2: Use the holes in the bracket as a guide to mark the holes. (Fig B)

(Fig A) (Fig B)

Step 3: Depending on the type of hardware you plan to use (Self Tapping bolts, Bolts with Nuts, ect) set

the bracket to the side and drill the proper size mounting holes needed. You can purchase hardware

at any home improvement store.

Note: Always use caution when drilling. Make sure there are no obstacles or obstructions.

Please read instructions entirely before installing this product.

PAGE 1
Installation Instructions Jerry Can Holder Application: Universal Part # 2798 WWW.SMITTYBILT.COM Please read instructions entirely before installing this product. Parts Included Jerry Can Holder (Base) Qty 1 Parts Included Jerry Can Top Strap Qty 1 This is a Universal Jerry Can Bracket. It can be mounted in a variety of places. (Truck beds, trailers, bumpers, roof racks, ect..) Due to this no hardware is included. Step 1: Determine the location you want to mount your bracket.
PAGE 2
Installation Instructions Jerry Can Holder Application: Universal Part # 2798 WWW.SMITTYBILT.COM Step 4: Install top strap bracket over can by connecting the hook side to the buckle. (Fig A) and the slot over the lock tab. ( Fig B) (Lock not included) Step 5: Installation is now complete. (Fig E) (Fig C) (Fig D) (Fig E) Note: Make sure to always use top strap when transporting Jerry can.