Installation Manual

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 400 West Artesia Blvd, Compton, CA 90220

Installation Instructions

Replacement Front Seat

(Part # 450xx, 455xx, 451xx, 495xx)

1976-2010 CJ & Wranglers

WWW.SMITTYBILT.COM

Note: All seats being installed in 1997 - 2006 Jeep ® TJ Wranglers will require a seat adaptor bracket

Included components:

(1) Seat

(1) Plastic Cover (LH)

(1) Plastic Cover (RH)

(1) Recliner knob

Knob Plastic Cover

Knob fully seated on the

recliner shaft.

Replacement Seat Assembly

1. Firmly press plastic cover to the side of the metal seat recliner bracket for each side.

2. Place recliner knob over recliner shaft and press firmly. Repeat for other side.

3. Recheck to make sure covers and knobs are securely seated and attached before installing seats.

Replacement Seat Installation

4. Remove old seat from riser by removing 4 bolts.

Save these bolts as they will be reused later.

PAGE 1
Installation Instructions WWW.SMITTYBILT.COM Replacement Front Seat (Part # 450xx, 455xx, 451xx, 495xx) 1976-2010 CJ & Wranglers Note: All seats being installed in 1997 - 2006 Jeep ® TJ Wranglers will require a seat adaptor bracket Included components: (1) Seat (1) Plastic Cover (LH) (1) Plastic Cover (RH) (1) Recliner knob Knob Plastic Cover Knob fully seated on the recliner shaft. Replacement Seat Assembly 1. Firmly press plastic cover to the side of the metal seat recliner bracket for each side. 2.
PAGE 2
Installation Instructions WWW.SMITTYBILT.COM Replacement Front Seat (Part # 450xx, 455xx, 451xx, 495xx) 1976-2010 CJ & Wranglers 5. Remove sliders from old seats by removing 4 bolts. Save these bolts as they will be reused later. NOTE: To access the rear 2 bolts push slider arm down and move slider forward. 6. Place sliders onto new seats. Reuse spacers from The old seat to align the slider. 7. Fasten slider to the new seat using the 4 bolts saved from step 5 8.