Installation Manual

www.smittybilt.com

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 1600 Walnut Parkway, Compton, CA 90220

Installation Instructions

G.E.A.R. Seat Cover

(Universal Fit)

Note: Carefully read the

following installation

instructions and tips for

ease of installation.

STEP 1: Position the cover over the seat. Then begin to attach the Velcro straps together by sliding

them through the plastic ring and then fold back. (Fig A, B) You can also adjust the width of

the cover by adjusting the placement of the plastic ring on the inside Velcro strap. (Fig C)

A Fi

B Fi

STEP 2: Position the bottom portion of the cover across the seat bottom. Attach the hooks underneath

the seat to a place that gives it a nice fit. Be sure the position does not hinder any sliding or

folding features of the factory brackets. (Fig D,E, F)

D Fi

PAGE 1
Installation Instructions G.E.A.R. Seat Cover (Universal Fit) www.smittybilt.com Note: Carefully read the following installation instructions and tips for ease of installation. STEP 1: Position the cover over the seat. Then begin to attach the Velcro straps together by sliding them through the plastic ring and then fold back. (Fig A, B) You can also adjust the width of the cover by adjusting the placement of the plastic ring on the inside Velcro strap.
PAGE 2
Installation Instructions G.E.A.R. Seat Cover (Universal Fit) www.smittybilt.com STEP 3: After the cover is completely on you may adjust the straps in order to get a better fit. You can adjust the cover and straps accordingly to access any special seat features like levers or knobs. You also can tuck and fold the straps behind the cover in order not to hinder Air Bag use or if your seat has a high headrest. (Fig G, H, I) Fig G Fig H Fig I STEP 4: You may now install your pouches.