User Manual

WWW.SMITTYBILT.COM

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 400 West Artesia Blvd, Compton, CA 90220

Installation Instructions

XRC Side Armor/Rocker Guards

Part # 76633, 76643

07-09 Jeep Wrangler (2-Door)

Parts Included Qty

Driver Side Bar 1

Passenger Side Bar 1

STEP 1: Identify the Driver and the passenger side. The shorter end goes towards the front.

STEP 2: Remove the two side nuts from the front and rear body mount area. (Fig A)

STEP 3: Install the guard on the vehicle by placing the cut-outs in the top of the brackets around the body

mounts while lining up the two holes in the top of the brackets with the bolts you previously

removed the nuts from. (Fig B)

(Fig A) (Fig B)

(Fig C)

NOTE:

Please read instructions entirely before installing product. It is recommended to have

assistance while installing this product.

Remove the two outer nuts from the front

and rear body mounts.

The top ‘U’ cut-

out goes around

the body mount

The two studs that you

removed the nuts from

go through the two slots

in top of the bracket.

PAGE 1
Installation Instructions WWW.SMITTYBILT.COM XRC Side Armor/Rocker Guards Part # 76633, 76643 07-09 Jeep Wrangler (2-Door) NOTE: Please read instructions entirely before installing product. It is recommended to have assistance while installing this product. Parts Included Driver Side Bar Passenger Side Bar Qty 1 1 STEP 1: Identify the Driver and the passenger side. The shorter end goes towards the front. STEP 2: Remove the two side nuts from the front and rear body mount area.
PAGE 2
Installation Instructions WWW.SMITTYBILT.COM XRC Side Armor/Rocker Guards Part # 76633, 76643 07-09 Jeep Wrangler (2-Door) STEP 4: While having an assistant hold the bar in place install the nuts you previously removed back on to the studs you removed them from through the access holes on the bottom of the brackets. Once all have been started you can tighten completely (Fig C) Installation is now complete. (Fig D,E) Follow the same steps for the opposite side.