Installation Manual

WWW.SMITTYBILT.COM
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
XRC Tube Fenders
76872, 76873(97-06 Wranglers)
76862, 76863 (87-95 Wranglers)
Parts Included Qty
Drivers Side Flare 1
Passenger Side Flare 1
6mm Allen Button Head Bolt 10
6mm Lock Nut 10
6mm Flat Washer 24
3/8” x 1” Hex Head Bolt (YJ) 6
3/8” Lock Nut (YJ) 6
3/8” Flat Washer (YJ) 6
8mm1.25x30mm Hex Head Bolt (TJ) 8
8mm Flat Washer (TJ) 8
8mm Lock Nut (TJ) 8
Step 1: Disconnect turn signals and secure wiring back out of the way. Remove the current plastic flares
from your vehicle.
Step 2: Trim the included template out, connect together and set on top of the fender. Place the formed front
portion to match the form of the fender where it meets the grille and lay down towards the back of
the fender where it meets the body tub/firewall. Use a marker to outline the template on the fender. (
(Fig A) (Fig B)
Please read instructions thoroughly before installing this product. Major modifications are required
to install this product and it’s recommended to be done by an experienced mechanic/installer.
Line the front “formed” part of the template with the
matching “form” where the fender meets the grill.