User Manual
WWW.SMITTYBILT.COM
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
Bowless Top
(Part #9973235 97-06 TJ)
(Part # 9083235 07-15 JK 4-Door)
(Part # 9073235JK 07-15 2-Door)
NOTE: You will need to have the following to install this part correctly.
1. Windshield Header ( Smittybilt Part #90104 TJ , # 90105 JK )
2. Tailgate retaining bar and brackets.
3. OE Door Surrounds
Step 1: Remove your hardtop or soft top and bow assembly. (If equipped).
Step 2: JK- Lay the center extended top section on a clean surface. Remove the knobs and latch
Bracket from your header and then slide header into the front of the top.
Connect the snaps on the top to the ones on the header. (Fig A, B)
TJ- Mount header on TJ windshield frame per header instructions.
Step 3: Lay the header on top of the windshield frame and spread top back over vehicle.
(Fig C)
(Fig A) (Fig B)
Note: Read instructions entirely before installing this product. It is recommended to install this
product when temperatures are above 75 degrees. If temperatures are below this; the material
can contract up to an inch. Wrinkles from packaging will go away once the material relaxes.
Vehicle picture may vary from your actual vehicle.