Owner manual

ManualsBrandsSmittybilt ManualsFor the carDN270-S4 Sure Steps

Installation Instructions

Sure Step

(Part #

DN260-S4B/

DN260-S4S

Part #

DN270-S4B/

DN270-S4S)

2009-2010 Dodge Ram1500 Crew Cab & Quad Cab

2010 Ram 2500/3500 Crew Cab

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 400 West Artesia Blvd, Compton, CA 90220

Summary of content (5 pages)

PAGE 1
Installation Instructions Sure Step (Part # DN260-S4B/ DN260-S4S Part # DN270-S4B/ DN270-S4S) 2009-2010 Dodge Ram1500 Crew Cab & Quad Cab 2010 Ram 2500/3500 Crew Cab For Technical Support/Warranty Information please call 310-762-9944 Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
PAGE 2
PARTS LIST: Qty 1 1 1 1 1 1 4 4 4 Description Driver/Left Sidebar Passenger/Right Sidebar Driver/Left Front Mounting Bracket Passenger/Right Front Mounting Bracket Driver/Left Rear Mounting Bracket Passenger/Right Rear Mounting Bracket 1/2” x 2” Hex Bolts 1/2” Lock Washers 1/2” X 1-1/2” OD x 1/8" flat washers Qty 4 2 6 6 6 6 4 4 4 Passenger Side Rear Mounting Bracket Passenger Side Front Mounting Bracket Description 12mm x 40mm Bolt/10mm Nut Plates 12mm x 40mm Bolt Plates 12mm x 32mm x 3mm Flat Washers
PAGE 3
Plate, (Figure 1A). Insert the Bolt and Nut Plate into the factory hole. Once the Bolt and Nut Plate is inserted, hold the Bolt end with one hand and tighten the Plastic Retainer with your other hand, (Figure 4). NOTE: Tighten the Plastic Retainer until it reaches the side panel. 9. Select the passenger side rear Mounting Bracket. Position the Mounting Bracket onto the installed Bolt and Nut Plate. Secure it with (1) 12mm Flat Washer, (1) 12mm Lock Washer and (1) 12mm Hex Nut, (Figure 5).
PAGE 4
(1) Bolt and Nut Plate (2) 12mm Hex Nut (2) 12mm Lock Washer (2) 12mm Flat Washer Fig 3 Front (1) 10mm x 35mm Hex Bolt (1) 10mm Lock Washer (1) 10mm Flat washer Fig 1A (1) Bolt and Nut Plate (1) 12mm Hex Nut (1) 12mm Lock Washer (1) 12mm Flat Washer (1) 10mm x 35mm Hex Bolt (1) 10mm Lock Washer (1) 10mm Flat washer (Fig 4) Rotate Bolt and Nut plate to line up Nut with this hole in body panel Rear Rear Fig 5 1/2" x 2" Hex Bolt Fig 6 Cleaning Maintenance 1/2" Flatand Washer 1/2" Lock Washer To pr
PAGE 5
For gloss black finishes: Mild soap, window and glass cleaner may be used. LIMITED WARRANTY Smittybilt (The Company) warrants to the original purchaser of this product that should the product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within the warranty period of 5 years from the date of purchase, such defect(s) will be repaired or replaced (At the Company’s option) without charge for parts or labor.