Installation Manual

ManualsBrandsSmittybilt ManualsAutomotiveSmittybilt FN1730S4B Sure Steps Gloss Black 3" Side Bar, Pair

Installation Instructions

Sure Step

(Part #

FN1730-S4B/FN1730-S4S)

1999-2004 Heritage Ford Super Cab F-150, F-250 Light Duty

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 400 West Artesia Blvd, Compton, CA 90220

Summary of content (5 pages)

PAGE 1
Installation Instructions Sure Step (Part # FN1730-S4B/FN1730-S4S) 1999-2004 Heritage Ford Super Cab F-150, F-250 Light Duty For Technical Support/Warranty Information please call 310-762-9944 Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
PAGE 2
PARTS LIST: 1 1 1 1 1 Driver/Left Sidebar Passenger/Right Sidebar Driver/Left Front Mounting Bracket Passenger/Right Front Mounting Bracket Driver/Left Rear Mounting Bracket 2 2 8 8 8 1 4 4 4 Passenger/Right Rear Mounting Bracket 1/2” x 2” Hex Bolts 1/2” Lock Washer 1/2” ID x 1 1/2” OD x 1/8 Flat Washers 10mm Narrow Double Bolt Plate (for driver side 1 rear on 3-Door models only) Passenger Side Rear Mounting Bracket 2 8 16 8 10mm Offset Double Bolt Plates (for front) 10mm Double Bolt Plates (for rear
PAGE 3
the smaller round hole on the inside of the rocker panel. Continue to thread the Plastic Retainer down the Bolt Plate until it is flush with the sheetmetal. Thread (1) Plastic Retainer onto the remaining threaded end on the Bolt Plate, (Figure 6). IMPORTANT: The Plastic Retainer is designed to prevent the Bolt Plate from falling into the body cavity and to aid in mounting the Bracket. 6.
PAGE 4
Offset Double Bolt Plate 10mm Lock Washers 10mm Flat Washers 10mm Hex Nuts Driver Side Installation Pictured Align holes in brackets with holes in pinch weld.
PAGE 5
Cleaning and Maintenance To protect your investment, wax this product after installing. Regular waxing is recommended to add a protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could damage the finish. For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild soap, window or glass cleaner may be used also. For gloss black finishes: Mild soap, window and glass cleaner may be used.