User Manual

Page 7
Step 3
Connect the iCalc to Your Bluetooth Computer
• Make sure the power is on and the OS Selector at the
bottom of the keypad is switched to the correct OS. The
LCD display should say “On Keypad” and a “0” is displayed.
• Before you can use Bluetooth devices for the first
time, you must connect your devices through a
standard discovery and pairing process.
• The iCalc Bluetooth Calculator Keypad is designed to
work with Bluetooth-enabled systems. Please review
the documentation that comes with your computer
system for any specifics regarding your Bluetooth system
and/or consult with your system vendor if you cannot
find the Bluetooth connectivity in your system.
Important: During the process of connecting your iCalc to
your Bluetooth system, you must set the iCalc Calculator
Keypad to Keypad Mode by tapping on the Mode key
until the word “Keypad” appears on the LCD display.
Page 12
• Your iCalc Bluetooth Calculator Keypad is designed with a
power-saving feature which goes into sleep mode with the LCD
display shuting off after approximately 30 minutes of inactivity.
To wake up the keypad from sleep mode, press the “WAKE”
key. Note: You don’t need to reconnect the Bluetooth keypad
to your computer after waking up the keypad as the keypad
stays connected to the computer during sleep mode.
Important: In some Mac systems the sleep mode triggers
a “Connection Loss” warning message. Please ignore the
message and tap on the “WAKE“ key to resume. This
warning message is a standard feature of some Mac OS
and it doesn’t impact your Bluetooth keypad connection.