User`s guide

Page 11
Note: You have 10 seconds to perform each of these steps. If
you do not nish within 10 seconds, the device button light
will turn off and setup mode will be exited. You will then need
to start over.
Step 4: Enter the four-digit code. If it is a valid code, after the
4th digit is entered, any prior device will be removed and it
will be set with new code. This removes any “learned” keys
as well. If the code is not valid, the device button will ash 4
times. Either way, the device button will turn off and you will
exit setup mode.
Step 5: Point Blu-Link™ towards your device and press the
power button. If you have the correct code, the device
should turn off. If the device didn’t turn off, please look up
the next code and return to step 3 until you have tried all
four-digit codes for your brand of device.
Step 6: Sometimes more than one code will control your device.
Test the other buttons on the remote control. If functions
aren’t working correctly, try the other device codes until you
have selected the best code for your device.