User`s guide

Page 16

Forgetting a Device

Step 1: Enter setup mode by holding the device button down

for 3 seconds. After 3 seconds all of the device buttons will

blink to conrm that you are in setup mode.

Step 2: Enter the code 9999 to erase the prior four-digit code

and any learned keys for the device.

Note: Pressing any key besides “9” during this mode will exit.

Forgetting all Devices

Step 1: Enter factory-reset mode by holding down two device

buttons for 3 seconds. After 3 seconds all of the device but-

tons turn on to conrm you are in factory-reset mode.

Step 2: Enter the code 9999 to erase the prior four-digit code

and any learned keys for all devices.

Note: Pressing any key besides “9” during this mode will exit.