User’s Manual Bluetooth Stopwatch Presenter with Laser Pointer Page
Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Certification This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
• Consult the dealer or an experienced radio/TV technician for help. Notice: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Extension cables are not recommended, if used, they must be shielded in order to comply with the emission limits. IC Certification The term “IC” before the certification/registration number only signifies that the Industry Canada technical specifications were met.
System Requirements Hardware: Bluetooth-enabled system (via built-in Bluetooth capability or external Bluetooth adapter) Operating System: Windows 2000, XP or Vista Macintosh OS X or above (F5 SlideShow and Alt-Tab Application Switch not supported) Package Contents • • • • Bluetooth stopwatch presenter 2 x AAA batteries User’s manual Carrying case Installing the Rechargeable Batteries (Supplied) Sliding the battery cover off Page Insert batteries to the correct polarities
• Open the battery compartment by pressing down the cover latch and sliding the door off the presenter. • Insert the two supplied AAA batteries (included in the package) to the battery slots. Make sure the positive (+) and negative (-) ends of the batteries match the polarity markings inside the battery compartment. • • Close the battery cover back into position Power on the presenter by sliding the on/off switch to ON position.
Connecting with Your Bluetooth Computer Before you can use Bluetooth devices for the first time you must connect your devices through a standard discovery and pairing process. Microsoft Windows Bluetooth Stack 1. Make sure your computer’s Bluetooth radio is turned on. 2. Make sure your Bluetooth presenter is turned on (check the on/off switch located on the left-hand side of the presenter. 3. Right click the Bluetooth icon located on your Desktop or the System Tray, select Add a Bluetooth Device.
4. A list of connected Bluetooth devices is presented on the screen. Select Add…; click OK. 5. At this point, the presenter must be placed in discovery mode. Press the Connect button located above the battery cover at the back of the presenter.
light on the top of the presenter will flash, indicating the presenter is in discovery mode ready to be connected to the computer. Connect Button 6. Check My device is setup and ready to be found and click Next. This must be performed within 20 seconds to avoid expiration of the discovery signal.
7. The Interlink Bluetooth Presenter will be discovered and listed on the screen. Highlight the name of the device and click Next.
8. The Wizard will ask you whether you like to add a passkey. Select Don’t use a passkey as this product is not a keyboard product and does not support passkey. Click Next. 9. Click Finish on the Wizard to complete the process.
10. The Found New Hardware Wizard appears and the OS will install the driver automatically. No other steps are necessary. 11. The Bluetooth icon will turn to green. Your Bluetooth Stopwatch Presenter is ready to use. Macintosh Bluetooth Software 1. Make sure your computer’s Bluetooth radio is turned on.
2. Make sure your presenter is turned on (check the on/off switch located on the left-hand side of the presenter.) 3. Click the Bluetooth icon located on your desktop or in the system bar. 4. Or, click the Apple icon and click System Preferences, then click on the Bluetooth icon. 5. Select Turn Bluetooth On to enable Bluetooth for your Macintosh computer if it’s not already on.
6. Select Set Up New Device. Bluetooth Setup Assistant screen will show up. Click Continue. 7. At this point, the presenter must be placed in discovery mode.
button located above the battery cover on the back of the presenter. The LED light on the top of the presenter will flash, indicating the presenter is in discovery mode ready to be connected to the computer. Connect Button 8. The screen will ask you for the device type. Select Mouse from the device list and click Continue.
9. The computer will search for Bluetooth devices in the range (within 33 feet or 10 meters) and list each device on the screen. 10. Select Interlink Bluetooth Presenter and click Continue.
11. On the Conclusion screen, click Quit to exit setup. Your Bluetooth presenter is successfully installed.
• • F5/Esc Slideshow toggle key starts a slideshow (F5) and exits from a slideshow (Esc). Note: in PowerPoint slideshow starts with page 1 when resumed in the middle of a presentation. Next Page key to advance to the next slide. • Previous Page key to return to the previous slide. • Application Switch (Alt-Tab) key displays all the open windows and switches to the desired window by pausing over the selected window icon for 3 seconds.
• Scroller on the side allows the presentation of a long document such as an Excel file. Scrolling one notch up or down advances one line at a time. To advance in rapid mode press up or down on the scroller for more than 1 second at a time. In PowerPoint the scroller serves as an alternative key for Next Page and Previous Page. • Stopwatch control and LCD display (H: MM) • When presenter power is turned on: stopwatch on standby and LCD display turns on (the Hour and Minute separator “:” is constant.
LCD display shows time advancing by 1 minute increment. • To pause the stopwatch, press the stopwatch button once; the Hour and Minute separator “:” stops flashing. • To resume the stopwatch, press the stopwatch button once more; the Hour and Minute separator flashes again and the time advances. • To power off the stopwatch function, hold down the stopwatch button for 3 seconds and the LCD display shuts down.
side of the presenter before using it. • Conserve the battery power by switching the on/off switch to “OFF” position while traveling. If you will not use the presenter for a long period of time remove the batteries from the battery compartment. • When the laser beam becomes dim it may be due to low battery power. Replace with 2 fresh batteries to ensure continuous presentation without power disruption.
reconnect the devices. • If the connection is frequently lost under normal operation, contact your system vendor’s technical support or check for Bluetooth stack update on your system vendor’s website Warranty: SMK-LINK Electronics warrants to the original end-user purchaser of the Product (“you”) that the Product, excluding batteries, will be free from defects in materials or workmanship under normal use and service for one-year from date of purchase.
first contact SMK-LINK Electronics Product Support to receive an RMA Number. The contact information can be found on SMK-LINK Electronics website: http://www.smklink.com/support/contactsupport. html. This warranty does not affect your statutory right and you may also have other rights which vary from state to state.
FDA Compliance for Class 2 Laser CFR21 SUBCHAPTER J EN 60825-1:1994+A1+A2 Thank You Thank you for purchasing the Bluetooth Stopwatch Presenter with Laser Pointer. We know you had other choices and we appreciate that you chose Interlink Electronics Bluetooth Calculator Keypad by SMK-LINK for your product needs. So that we may better serve you in the future, please register online at www.smklink.com/register.