User's Manual

13
Programming Remote to
Control Another Device
Scanning the Remote Database
Turn the device and receiver on.
Press and hold the correct
Mode button for the device until
all Mode buttons light up.
Skip this step if programming
TV or DVD Mode buttons.
For AUX Mode only. Press
0 for second TV.
1 for second DVD/VCR/Blu-ray player.
2 for tuner, amplier, or audio receiver.
Press the STAR (*) button.
Press POWER.
Press and release UP ARROW
slowly. When the device turns
off, continue to Step 6. If the
device remains on, continue
pressing UP ARROW. When
all codes have been tried, the
Mode button ashes eight times.
Try Learning From Another
Device’s Remote on page 24.
Press POUND (#). The Mode
button ashes three times.
Turn the device on and try other
buttons to make sure the device
responds the way you expect.
If not, try another code by
returning to Step 1.
1
2
3
4
5
6
7