User's Manual

VGP-BRMP10_3-196-908-01(1)

Continued on next page

Adjusting the pointer speed

If the pointer does not move smoothly when you slide your finger on the

touch panel, use the steps below to set the pointer to a speed that is easier to

use.

(The instructions below are only an example. The actual procedure may

differ depending on your personal computer. For details, refer to the

manuals provided with your personal computer.)

1 Click “Start”, then “Control Panel”.

The Control Panel window appears.

If you are using Windows XP:

Click the “Printers and Other Hardware” icon.

If you are using Windows Vista:

Click the “Hardware and Sound” icon.

2 Click the “Mouse” icon.

The Mouse Properties dialog appears.

3 Click the “Pointer Options” tab.

4 Adjust the speed, then click “OK”.

z Tip

You can also change the pointer appearance in the Mouse Properties dialog.

Changing the pointer speed using this procedure will also change the speed of the

pointer controlled by your personal computer’s touchpad or mouse.

Tips for giving a smooth presentation

Here are some tips for making your presentation go more smoothly.

Setting the pointer options to always show the pointer arrow

If you are using PowerPoint software, we recommend making the following

settings before starting your presentation.

1 While a slideshow is running, press the Right button to

display the shortcut menu.

2 Select “Pointer Options”, “Arrow options”, then click “Visible”.

This setting will make the pointer arrow visible at all times during a

slideshow (by default, during a presentation the pointer is hidden if it does

not move for more than 3 seconds).

After the slideshow ends, the setting will return to the default value, so you

must perform this setting each time.