User's Manual

22
GB
VGP-BRMP10_3-196-908-01(1)
Symptom Cause/Remedy
Pressing the
CONNECT button
does not establish a
connection.
Pressing the SLIDE
SHOW button does
not start/stop the
sideshow.
The scrolling features
do not work.
When I am using the
controller, the display
goes dark or the
personal computer
enters power-saving
mode.
The personal
computer does not
return from Standby
mode.
c Communication between the controller and your
personal computer may not have been properly
established. If the CONNECT button on the controller
is not pressed within 30 seconds after the Bluetooth
device search begins, or if the operation does not
complete within one minute of pressing the
CONNECT button, controller communication is
cancelled. In such a case, perform the procedure again
to enable communication. For details, see “Using the
Bluetooth Utility software to enable communication”.
c If the controller and personal computer are too far
apart, communication is not possible. The maximum
communication distance between the controller and
personal computer is about 32 ft. (10m). If used on a
metal table or if obstacles lie between the controller
and personal computer, the usable distance may be
less.
c The operation may take some time if Windows is busy
or another software is running. Try waiting until the
software completes its operation, or restart the
software.
c Each time you press the SLIDE SHOW button, it
switches between start and end. If the slideshow does
not start or stop, try pressing the button again.
❒ The operating system is not compatible.
c Use a supported operating system.
❒ The program you are using is not compatible with
scrolling features.
c The scrolling features only work with programs that
use a scroll function.
c Some programs do not support scrolling features.
❒ The personal computer enters power-saving mode
even while the controller is in use.
c Change the power management settings for the
personal computer to prevent it from entering
power-saving mode. For details, refer to the
manuals provided with your personal computer.
c Touch the touchpad or press any key on the
keyboard of the personal computer to recover from
power-saving mode.
c Touch the touchpad or press any key on the keyboard
of the personal computer to exit this mode.