User's Manual

VGP-BRMP10_3-196-908-01(1)

Continued on next page

Note

To prevent battery fluid leaks and damage, observe the following precautions.

• Insert the batteries with the correct + - orientation.

• Do not charge dry cell batteries.

• Do not use old and new batteries together. (Doing so may cause the battery fluid

to leak. It can also prevent the controller from operating.)

• Do not use different types of batteries together.

• If the controller will not be used for a long time, remove the batteries.

• If a battery fluid leak occurs, carefully wipe the battery compartment, and insert

new batteries.

• To prevent accidental operation, be careful not to press any buttons when

replacing the batteries.

4 Close the battery compartment cover.

z Hint

The battery will last approximately 14 hours of continuous use (when using alkaline

batteries). Check the controller's POWER lamp if the pointer becomes unresponsive, or

the operating range between the personal computer and controller becomes shorter. If the

POWER lamp is flashing yellow, replace the batteries. When not using the controller, set

the power switch to off.

Replacing the batteries

The POWER lamp flashing yellow indicates that the battery life is running low. Replace

the batteries when this occurs.