Instructions / Assembly

Smoker Assembly
Locate:
• Bottom Panel Assembly
• (2) Front Legs
• Rear-Left Leg
• Rear-Right Leg
• (8) M6 x 16 Screws
Tools Needed:
Phillips Screwdriver
Locate:
• Cabinet Assembly
• (6) M4 x 12 Screws
• (2) ST4.2 x 8 Self-tapping Screws
Tools Needed:
Phillips Screwdriver
Step 1
Step 2
Procedure:
Use (8) M6x16mm Screws to
assemble the Legs to the
Bottom Panel Assembly as shown.
7
Smoke
r
A
ssembl
y
Locate:
• BottomPanelAssembly(29)
• 2FrontLegs(2),RearLeft‐Leg
(1),Rear‐RightLeg(6)
• 8pcsM6x16mmScrews(C)
Tools Needed:
Phillips Screwdriver
Step 1
Rea
r
Vent
Knob
Rear
Handle
Procedure:
Use(8)M6x16mmScrewsto
assemblethe2FrontLeg,Rear‐
LeftLegandRear‐RightLegtothe
BottomPanelAssemblyasshown.
Locate:
CabinetAssembly(16)
•
6pcsM4x12mmScrews(A)&2pcs
ST4.2x8mmSelf‐tappingScrews(B)
Tools Needed:
Phillips Screwdriver
Step 2
Rea
r
Vent
Knob 
Rea
r
Handle
Procedure:
RemovetheDoorAssemblyandset
aside.TurntheCabinetAssembly
upsidedown.
Use(6)M4x12mmScrews
and
2pcsST4.2x8mmSelf‐tapping
Screws
toassembletheBottom
PanelAssemblyintotheCabinet
Assembly asshown.
7
Smoke
r
A
ssembl
y
Locate:
• BottomPanelAssembly(29)
• 2FrontLegs(2),RearLeft‐Leg
(1),Rear‐RightLeg(6)
• 8pcsM6x16mmScrews(C)
Tools Needed:
Phillips Screwdriver
Step 1
Rea
r
Vent
Knob
Rear
Handle
Procedure:
Use(8)M6x16mmScrewsto
assemblethe2FrontLeg,Rear‐
LeftLegandRear‐RightLegtothe
BottomPanelAssemblyasshown.
Locate:
CabinetAssembly(16)
•
6pcsM4x12mmScrews(A)&2pcs
ST4.2x8mmSelf‐tappingScrews(B)
Tools Needed:
Phillips Screwdriver
Step 2
Rea
r
Vent
Knob 
Rea
r
Handle
Procedure:
RemovetheDoorAssemblyandset
aside.TurntheCabinetAssembly
upsidedown.
Use(6)M4x12mmScrews
and
2pcsST4.2x8mmSelf‐tapping
Screws
toassembletheBottom
PanelAssemblyintotheCabinet
Assembly asshown.
Rear-Left
Leg
Rear-Right
Leg
Front
Leg
Front
Leg
Procedure:
Remove the Door Assembly and set
aside. Turn the Cabinet Assembly
upside down. Use (6) M4x12mm Screws
and 2pcs ST4.2x8mm Self-tapping Screws
to assemble the Bottom Panel Assembly
into the Cabinet Assembly as shown.
7