Instructions / Assembly

Smoker Assembly
Locate:
• Cabinet
• Control Panel Assembly
• Cable Cover
• (12) ST4.2 x 8 Self Tapping
Screws
Tools Needed:
Phillips Screwdriver
Procedure:
Turn the Smoker Cabinet right
side up and put your smoker
stand on the oor. Place two
hooks of Control Panel onto the
Cabinet square holes and push
back into place as shown. Use (2)
ST4.2x8mm Self-tapping Screws
to assemble the Control Panel
Assy into the Cabinet as shown.
Use (10) ST4.2x8mm Self-tapping
Screws to assemble the Cable
Cover into the Cabinet as shown.
Step 3
8
Smoke
r
A
ssembl
y
Step 3
Locate:
• Cabinet(16)
• ControlPanelAssy(15)
• CableCover(14)
•
12pcsST4.2x8mmSelf‐tapping
Screws(B)
Tools Needed:
Phillips Screwdriver
Procedure:
TurntheSmokerCabinetright
sideupandp
utyoursmoker
standonthefloor.Placetwo
hooksofControlPanelontothe
Cabinetsquareholesandpush
backintoplaceasshown.Use(2)
ST4.2x8mmSelf‐tappingScrews
toassembletheControlPanel
AssyintotheCabinetasshown.
Use(10)ST4.2x8mmSelf‐tapping
ScrewstoassembletheCable
CoverintotheCabinetasshown.

8
Smoke
r
A
ssembl
y
Step 3
Locate:
• Cabinet(16)
• ControlPanelAssy(15)
• CableCover(14)
•
12pcsST4.2x8mmSelf‐tapping
Screws(B)
Tools Needed:
Phillips Screwdriver
Procedure:
TurntheSmokerCabinetright
sideupandp
utyoursmoker
standonthefloor.Placetwo
hooksofControlPanelontothe
Cabinetsquareholesandpush
backintoplaceasshown.Use(2)
ST4.2x8mmSelf‐tappingScrews
toassembletheControlPanel
AssyintotheCabinetasshown.
Use(10)ST4.2x8mmSelf‐tapping
ScrewstoassembletheCable
CoverintotheCabinetasshown.

8