Instructions / Assembly

The SET/CHECK TIME button allows you to set your smoking time from 1 hour to 99 hours. You are also able to check
the time left to smoke during any smoke program by pressing the SET/CHECK TIME button once. Your time will change
in 1 hour increments with pressing the SET/CHECK TIME button one time. After you have set your hours, if you press the
SET/CHECK TIME button again you will be able to set the minutes for your smoking cycle. Your minutes will change in 10
minute increments.
The SET/CHECK TEMP button allows you to set your desired smoking temperature in the smoking programs. You will
be able to set your temperature range in the Cold Smoking program between 50°F and 125°F and in the Hot Smoking
program between 125°F and 290°F. You are able to check your internal temperature inside the smoker at any time
during any of the smoking programs by pressing the SET/CHECK TEMP button once. Your temperature will change in 5°F
increments when setting the internal smoker temperature.
The SET/CHECK PROBE button allows you to set your desired meat probe temperature in the smoking programs. You will
be able to set your meat probe temperature range in both Smoking programs between 50°F and 300°F. If you chose not
to use the meat probe, you can press the SET/CHECK PROBE button and when you reach the lowest temperature the next
setting will shut the probe OFF. You are able to check your meat probe temperature at any time during any of the smoking
programs by pressing the SET/CHECK PROBE button once. Your temperature will change in 5°F increments when setting
the meat probe temperature. Once the meat probe reaches the set temperature, there will be an alert sound for 3 seconds
to notify you that the meat probe has reached the set temperature. The probe will not disengage the elements.
The ARROW CONTROL buttons allow you to change the time and temperature up and down accordingly. When
you press the UP/DOWN ARROW button, the time will change in 1 hour increments or 10 minute increments and the
temperature will change in 5°F increments. If you push and hold the UP/DOWN ARROW button for 3 seconds or more, the
time and temperature will scroll at a faster rate.
When the LIGHT button is pressed the LED light under the control panel will power on. When the button is pressed a
second time the LED light will power off. The LED light will be operational during any status, including the stand by status.
The DIGITAL LED SCREEN is your information center for the smoker.
The LED screen will display your Time, Temperature and Meat Probe
Temperatures you have set. When you have chosen a smoking mode
and set your information, the LED screen will scroll between Time,
Temperature and Meat Probe Temperature during the smoking cycle.
There are 5 displays above the LED screen, Time, Temp, Probe, Smoke
and Heat. When these modes are operational, the individual display will
be lit to indicate they are operating.
1. The “TIME” will be lit on the controller when you are setting the time in the program modes and when the LED screen is
scrolling and the remaining time appears on the screen.
2. The “TEMP” will be lit on the controller when you are setting the temperature in the program modes and when the
LED screen is scrolling and the temperature appears on the screen.
3. The “PROBE” will be lit on the controller when you are setting the meat probe temperature in the program modes and
when the LED screen is scrolling and the meat probe temperature appears on the screen.
4. The “SMOKE” will be lit on the controller when the smoke element is turned on during the program modes and when
the “FAST SMOKE” is on.
5. The “HEAT” will be lit on the controller when the heat element is turned on during the program modes.
Operating Instructions
16