Instructions / Assembly

7
1/2” Wrench
Vent Damper Plate
with plastic tab guard
#10-24 lock washer
2 required
#10-24 x 5/8” bolt
2 required
#10-24 nut
2 required
Assembly Step 2
Phillips Head
Screwdriver
Note that the metal
tab that goes inside
the “butterfly” holes is
specifically designed to
keep these vent
partially open at all
times.
This is a safety feature
required in all Smoky
Mountain Vertical
Smokers.
Hardware Bag
E
1. Remove all loose inner packages from inside cabinet. Set the cabinet assembly top side down. To
prevent scratching or damage to your smoker, set the cabinet on a padded surface like cardboard or
carpet.
2. Set the damper plate on the side of the cabinet and align it with the corresponding “butterfly” holes.
The metal tab should seat inside the one of these holes and the plastic tab guard should be
positioned towards the top of the smoker.
3. Insert a bolt through the damper plate center hole and through corresponding hole in the center of
the “butterfly” hole.
4. From the inside of the cooking chamber, place a lock washer and nut on the bolt and secure.
5. Thread nut just tight enough to keep the damper plate snug but all it to rotate with little resistance.
6. Repeat on other side of cooking chamber.