User Manual

09
Note: The system default is to record 24 hours a day. If Motion Detect is
required to set, you shall select Detect in the Schedule and open recording
function of a corresponding channel in the setting of Motion Detect, as
shown below:
Right Click,navigate to Main Menu>Record
You can set the cloud channel and record time here.After setting,please
click Application to save,then click Ok.
You can Copy the setting to the any channel you want, here is the step,Click
Advanced>Copy, choose the channel you want to paste the setting.
Then Right Click,navigate to Main Menu>Alarm>Motion detect>Advance,
for motion detect detail setting,please refer to Page 11, Motion detect