OWNER’S MANUAL SMT9.2HR SMT9.2HRAB Model Name SMT9.2HR/SMT9.2HRAB Serial Number Purchase Date Write down for future reference. treadmillbynet.com Smoothfitness.com SALES: (888) 559-8810 Part# 15-0128 SERVICE: (888) 340-0482 Smooth Fitness Mt.
Table of Contents Information Page# Model Specification Sheet 3 Important Safety Information 4 Before You Start 5 Warm Up Exercises 6 Assembly Instructions 7 Power Requirements 8 Console Functions and General Descriptions 9 Console Layout 10 Program Operating Instructions—Quick Start Manual Mode 11 Program Operating Instructions—Program Mode 11 Program Operating Instructions—Customizing Pre-set Programs 12 Program Operating Instruction—Customizing User Defined Programs 12 Program Ope
Model Specification Sheet MODEL Horsepower Continuous Console Display Pre-set Programs Custom Programs User Defined Programs Heart Rate Interactive Incline Range Speed Range Belt Type Belt Size (Width x Length) in inches Residential Motor Warranty Residential Parts Warranty Residential Frame Warranty Residential Labor Warranty Light Institutional Warranty Width x Length in inches User Weight Warranty Frame SMT9.2HR SMT9.2HRAB 3.0HP 3.
Important Safety Information WARNING! Before using this treadmill or starting any exercise program, consult your physician. This is especially important for persons over the age of 35 and/or persons with preexisting health problems. The manufacturer or distributor assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
Before You Start Thank you for purchasing the SMOOTH treadmill! This quality product you have chosen was designed to meet your needs for cardiovascular exercise. z Before you start, please read the Owner's Manual and become familiar with the operation of your new treadmill. z Remember to take the time to perform the stretching exercises provided to avoid injury. z Do not stand on the walking belt while pressing the Power button or Start/Stop button.
Warm Up Exercises EXERCISE GUIDELINES WARNING! Before beginning this or any exercise program, you should consult your physician. This is especially important for individuals over the age of 35 or individuals with pre-existing health problems. Warming up prepares the body for the exercise by increasing circulation, supplying more oxygen to the muscles and raising body temperature. Begin each workout with 5 to 10 minutes of stretching and light exercise to warm up.
Assembly Instructions Minor Assembly Required! The Smooth 9.2HR and HRAB treadmill is shipped in two pieces: the console upright assembly, and the base assembly. After opening the box, remove any packing materials from the treadmill. Do not throw away any packing materials until the unit is working properly. The treadmill box contains a package that includes the Owners Manual, a RED SAFETY KEY, and a belt adjustment tool. The treadmill will not operate without the Red Safety Key.
Power Requirements IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT IF IT WILL NOT FIT THE OUTLET. HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN. This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power.
Console Functions and Descriptions There are five LED display windows on the control panel to provide you with vital feedback information. TIME WINDOW z z TIME: Indicates elapsed time after pressing start in minutes and seconds (0-99 minutes, 0-59 seconds) PACE: Indicates number of minutes to complete 1 mile at current speed. SPEED WINDOW z SPEED: Indicates MPH (miles per hour) or Km/H (kilometer per hour) in .
Console Layout SMT9.2HR and SMT9.2HRAB IMPORTANT! Please note that the Console Overlay used on the SMT9.2HRAB will read SMT9.2HR. The only difference in the two models is the type of walking belt used. The SMT9.2HRAB uses a thick, orthopedic-style belt. To verify the model you have received, review the SERIAL NUMBER LABEL located on the console upright. The Serial Number Label will indicate the actual model number.
Program and Operating Instructions QUICK START / MANUAL MODE z Plug into a standard wall outlet (110-Volt AC, 15-amp circuit). z Stand on the treadmill and straddle belt. z Press POWER button. There will be an eight (8) second delay after pressing the POWER button before data can be entered. The TIME window will flash. z Press START/STOP button. Belt will begin to move after 4 seconds. Step on belt slowly after the belt starts moving.
Program and Operating Instructions PROGRAM MODE continued Customizing Pre-Set Programs z Customizing programs in P1 and P2 Mode: Each pre-set program can be customized in the P1 or P2 mode. After making the program selection, the top right window (CALORIES / DISTANCE) will read “OP.” ”OP” refers to “original program” and is preset. Press the same program button once more, and the CALORIE / DISTANCE window will read P1. The “P1” mode is now accessed.
Program and Operating Instructions See page 14 for pictures and diagrams HEART RATE MONITOR MODE The treadmill may at any time be used in the Heart Rate Monitor Mode. If the signal from the chest strap is detected, heart rate BPM will be displayed in the INCLINE window. The incline will only be briefly displayed if manual or program changes are initiated. The Heart Rate program is designed to keep your heart at a desired amount of “beats per minute” by automatically adjusting the incline.
Program Instructions Heart rate Mode TARGET UP TARGET DOWN WORKOUT TIME CALORIES/DISTANCE START/STOP POWER TARGET ARROWS PAUSE ENTER PROGRAM INCLINE WINDOW 14
Program Profiles SPEED 12 11 10 9 8 7 6 5 4 3 2 1 INCLINE 1 2 3 4 5 6 7 8 9 10 The Rolling Hills Program is designed to vary treadmill elevation while maintaining a constant walking belt speed. SPEED 12 11 10 9 8 7 6 5 4 3 2 1 INCLINE 1 2 3 4 5 6 7 8 9 10 The Speed Intervals Program is designed to vary treadmill speed while maintaining a constant elevation. Each program contains 10 segments or intervals. For instance, a 30 minute program will have 10 three-minute segments (30 minutes divided by 10).
Belt Adjustment and Tension WARNING! Do not overtighten rollers! This will cause premature roller bearing failure! Belt adjustment and tension performs two functions: adjustment for tension and centering. Your new treadmill comes pre-adjusted from the factory for tension and centering. Please follow the procedures below if the belt shifts to the left or right while walking: WALKING BELT IS SHIFTING TO THE LEFT (Diagram 1) First, turn treadmill on to run at 1 mph.
Maintenance Instructions WARNING! Before performing any maintenance to your treadmill, always unplug the power cord from the surge protector. CLEANING Routine cleaning of your Smooth treadmill will extend the life of your treadmill. WARNING! To prevent electrical shock, be sure the power to the treadmill is OFF and the unit unplugged from the wall electrical outlet before attempting any cleaning or maintenance.
Troubleshooting Guide Treadmill will not start. 1 Is the Safety Key inserted into the treadmill Console? 2 Make sure the power cord is plugged into a surge protector, the surge protector is plugged into a properly grounded outlet, and the surge protector is turned on. (Refer to “Power Requirements” on page 8) 3 Check the circuit breaker located on the front of the treadmill. If the switch protrudes, it has tripped. Wait five minutes and then press the switch back in.
Parts & Exploded View Part # Part # 1 Left Side Extrusion Rail 05-0045 12 Front Wheel (2) 06-0039 2 Right Side Extrusion Rail 05-0045 13 Uprights for Console (2) 23-0134 3 Treadmill Belt AeroBelt 04-0010 04-0014 14 Motor Hood Cover Top 06-0040 4 Front Roller Assembly 24-0106 15 Motor Drive Belt 04-0023 5 Rear Roller 09-0009 16 Motor 12-0004 6 Treadmill Deck 03-0016 17 Elevation Motor (acuator) 12-0026 7 Left End Cap 06-0043 18 Console Assembly 24-0216 8 Right End
SMOOTH 9.2HR and 9.2HRAB Treadmills – LIMITED WARRANTY CONSULT YOUR PHYSICIAN BEFORE USING THIS PRODUCT. This Limited Warranty applies in the United States to products manufactured or distributed by Smooth Fitness (“Smooth”) under the SMOOTH brand name. The RESIENTIAL warranty period to the original purchaser is (lifetime) on the frame, (10) years on the motor, (3) years on parts, and (1) year labor. This warranty does not cover wear and tear, only manufacturer defects for the periods specified.
