User's Manual

CONFIDENTIAL AND PROPRIETARY
The Information contained in this document shall remain the sole exclusive property of s.m.s smart microwave sensors GmbH and shall not
be disclosed by the recipient to third parties without prior consent of s.m.s smart microwave sensors GmbH in writing.
UMRR-0F0002-1F0902-030B00 General Purpose USA Version 1 I Page 21 of 23 I November 13, 2014
Table 5: ID dependent frequency offset
f [GHz]
frequency
band
frequency
index sensor
ID0
frequency
index sensor
ID1
frequency
index sensor
ID2
frequency
index sensor
ID3
24.0560
FB4
FI4
FI2
FI0
-
24.0685
FB5
FI5
FI3
FI1
-
24.0810
FB6
FI6
FI4
FI2
FI0
24.0935
FB7
FI7
FI5
FI3
FI1
24.1060
FB8
FI8
FI6
FI4
FI2
24.1185
FB9
FI9
FI7
FI5
FI3
24.1310
FB10
FI10
FI8
FI6
FI4
24.1435
FB11
FI11
FI9
FI7
FI5
24.1560
FB12
FI12
FI10
FI8
FI6
If you want to disable the sensor ID dependent frequency offset send the following
command:
• ParNo.: 8
• Value: 0 (=deactivated, 1= activated (default))
• Action: 20
• Format: Int
If you use two sensors in combination we recommend you to choose frequency bands which
are not adjacent in order to avoid any interference, for example:
FB6 & FB8, FB7 & FB9, …